York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

40mm Dia x 20mm Height 15,300 MOS (rpm)

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

DeWalt DCB182 Li-Ion 18 Volt 4.0ah Battery Pack

The DEWALT XR 4.0Ah Li-Ion Battery Pack offers extended runtime and optimised power to complete applications quickly. The lightweight design provides the user with upgraded 4Ah power without increasing the size or weight over the 18V 3Ah battery pack. The battery has no memory effect and virtually no self-discharge, ensuring maximum productivity and less downtime. Its LED State of Charge indicator helps manage charging. The battery pack has excellent electrical characteristics and is compatible with all DEWALT XR Li-Ion 18V tools.

Specifications:
Battery capacity: 4.0Ah.
Voltage: 18V.
Height: 65mm.
Length: 110mm.
Weight 0.61kg.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez R.G. Medium Silicon Carbide

This stone is a mainstay, designed for general use. Length: 150mm.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Chicago Pneumatic? Heavy-Duty Air Speed Ratchet 3/8?? Square Drive

CP828
Efficient 1/2hp motor provides up to 50ft/lbs torque, teasing throttle for speed control. Compact, lightweight design, ideal for automotive work.

Specifications:
10mm bolt capacity.
1/4" NPT air inlet thread for 10mm air hose.
150rpm free speed.
90psi air pressure.
4CFM* air consumption.
Front exhaust.
Overall length: 254mm.

*Based on a 15 second cycle per minute average use.

SIP Trade Bench Morticer

01942
An ideal entry-level morticer. Excellent build quality and easily transportable. Cast iron construction for accuracy and quality performance. Gas strut gives smooth action. Can be used as a bench drill. Adjustable rise and fall handle for maximum leverage. 2 year warranty.

Specifications:
Supply: 230v (13amp).
Motor: 370w (0.5hp).
Chisel capacity: 6-12mm (1/4" ?? 1/2").
Max chisel stroke: 76mm.
Table size: 340 x 250mm.
Chisel to fence: max 65mm.
Weight: 31kg.

Bosch® 5" Angle Grinders

GWS 12-125CI
The compact tool with KickBack Stop - detects when the tool is jammed and shuts it down immediately. Distortion-resistant protective guard. Vibration control auxiliary handle with 70% vibration reduction for non-fatigue working (EN 50144). Direct cooling for high overload capability and long service life. Constant Electronic for constant speed, also under heavy load. Overload protection, smooth start and starting current limitation. Good handling thanks to slim housing. Gear head can be rotated in 90° steps. Handle can be used on right or left.

Specifications:
Power input: 1100W.
No load speed: 11000rpm.
Power output: 660W.
Spindle thread: M14.
Disc diameter: 125mm.
Rubber sanding plate diameter: 125mm.
Wire cup brush diameter: 70mm.
Weight: 1.60kg.
Comes with: protective guard, vibration control auxiliary handle, back flange, locking nut, two pin spanner, quick-locking nut and carrying case.

Disc supplied separately.

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits