Kennedy® 4-Way Trailing Sockets

Without cable and plug.

Makita Belt Sander

9920
1,010 watt motor. Unique design allows flush sanding to a wall with side of sander. With electronic variable speed control; just turn dial for optimal speed of job. Features auto-tracking belt system, high dust collecting capacity and low noise at 85dB.

Specifications:
Belt size: 76 x 610mm.
Belt speed: 210-440m/min.
Power rating: 1,010W.
Weight: 4.5kg.
Supplied with: abrasive belt, cork/carbon pad, and dust bag.

Available in 240V and 110V.

Reversible Pistol Grip Drill

B2834
Use for drilling and screwdriving. Two speed trigger (slow speed when pushed halfway). Directional lever accessible from both sides for left/right handed use. 10mm (3/8?) chuck included. Planetary gears for longer life and smoother running. Ergonomic comfortable grip.

Specifications:
Chuck size: 3/8? (10mm). Free speed: 1,800rpm.Recommended air pressure: 6.2bar (90PSI). Air consumption: 4CFM* (113l/min).
Air inlet thread: 1/4? NPT.Spindle thread: 3/8? - 24.Minimum air hose size (ID): 3/8? (10mm). Noise level?: 85dBA. Sound power level?: 96dBA. Vibration level #: 0.4m/s2. Overall length: 185mm. Net weight: 1.1kg.
? Per EN ISO 15744:2002.
# Per EN 28927-5.

Action Shots:
Ergonomic comfortable grip.
Two speed trigger for slow or fast action.
Forward/Reverse lever action.
Complete with industrial chuck.

Reversible Pistol Grip Drill 10mm (3/8?) - 1,800RPM

NiCad Batteries - O-Type

2607335536 18.0V 1.5Ah GML24V/VCD, AL2422DC, AL2425DV, AL2450DV, AL2498FC

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

3M Abrasive Utility Cloths and Sheets

314D
Aluminum oxide abrasive product rolls and sheets constructed on a J weight, durable cloth backing. For use in metalworking.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez E.D.M. Hard/Aluminium Oxide

Pencil Type. Specially formulated for EDM scale removal. Length: 150mm.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Red Line - Medium

General purpose blades, with medium TPI. For cutting both long grain and cross grain solid wood, giving a good finish.

3M Roloc? Brush Products

Designed for use on portable tools and featuring the convenient Roloc twist-on, twist-off fixing system.

Clean & Finish Flap Brush R

Flaps of high performance finishing web ideal for decorative finishing and light deburring applications.

Plate Switches

Wall mounting white plate switch, suitable for standard lighting and fluorescent fittings.