Norton Abrasives

Advanced grain and bond system for longer life and quicker cutting. Suitable for steel and stainless steel applications. Free from iron, sulphur and chloride. For use with portable angle grinders. Type 42 (depressed centre).

Type 42 Cut Off Discs

3M Roloc? Brush Products

Designed for use on portable tools and featuring the convenient Roloc twist-on, twist-off fixing system.

Clean & Finish Flap Brush R

Flaps of high performance finishing web ideal for decorative finishing and light deburring applications.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

180mm (7") 2300W Angle Grinder

Powerful 2,300W motor with dust proof ball bearing portion and durable retainer. New contruction to protect against grease leakage. Paddle switch (lock-on/lock-off) style. Sliding trigger (dead man's switch) style. With spindle lock 3-position side handle and tool-less angle adjustment of the disc guard.

Specifications:
Power input: 2,300W.
No load speed: 8,500rpm.
Wheel diameter: 180mm.
Hole diameter: 22mm.
Spindle thread: M14 x 2.
Weight: 5.2kg.

Supplied with pin spanner, side handle and grinding disc.

G18SE3-VIB

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein EDM Hard/Aluminium Oxide.

Specially formulated for EDM scale removal. Length 150mm.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

80mm Dia x 40mm Height 7,700 MOS (rpm)

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

80mm Dia x 30mm Height 7,700 MOS (rpm)

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

50mm Dia x 40mm Height 12,300 MOS (rpm)

Canning-Lippert "B" Quality Mop - Open Type (Medium Hardness)

All round mops for finishing steel and pressed brassware, nickel-silver, copper, brass, silver, aluminium chrome and plastics. Also suitable for nickel and chrome deposits. Made up of guaranteed quality all-cotton cloth in multiple sections of 1/2" (13mm) width. Open type mops will splay under pressure to suit irregular surfaces and give a medium polishing pressure. Can be used in conjunction with Lustre, Hyfin, Steelbrite, Scovax, and Satene compositions.



Product Number: 0220-193. Diameter: 6". Width: 2". Weight: 480g.

SIP Professional proTECH Direct Drive Compressors

Professional direct drive compressors for tough use. Two year warranty on all proTECH compressors. A range of innovative compressors delivering quality, reliability and safety. All models are compact and highly portable making them ideal for outdoor use. Larger than normal gauges ensure ease of reading and the ergonomic pressure reducer knobs have handy snap-to" adjustment.

06254 Airmate OL197/10RC

Specifications:
Oil-free.
1.5HP motor, 230V (13amp) supply.
10 litre air receiver.
Ideal for nailer/staplers.
Piston displacement 8.0CFM, maximum pressure 10 bar.