Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W183. Grade: RA80. Diameter: 13mm. Length: 6mm. Max. rpm: 70,000. Weight per 10: 40g.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Sharpening Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Square Aluminium Oxide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Paslode IM90i 90mm Gas Framing Nailer 6V

The Paslode IM90i is powered by an intelligent electronic fuel injection system offering excellent power and cold weather performance. Suitable for first fix timber to timber applications.

Fires 51-90mm nails.
Up to 180 fasteners/min.
Sequential trigger action.
Quick-release nose for jam clearance.
Reload indicator/open view magazine.
Fine depth adjustment.
Soft-grip handle.

Contents:
IM90i, 2 x 1.5Ah Ni-MH batteries, battery charger, cleaning solution, lubricant, safety glasses to EN 166:F, allen key, instruction manual and carry case.

Makita Batteries for Cordless Tools

Charger compatibility: DC1822, DC1804F.

NiCd Batteries - ?Plug-In? Type

4 in 1 Garden Tool Sharpener

Puts a sharp new edge on straight-edge loppers, grass hooks, pruning knives & weed knives. Simply place the guard over the cutting edge and draw the sharpener across the blade. The diamond-honed tungsten carbide sharpening heads restore a razor-sharp edge in minutes. Also sharpens most knives, including difficult-to-sharpen blunt kitchen knives. Not suitable for scalloped or serrated edges.

MS1501E

Kobe Eiko Power Tools

Kobe Eiko angle grinders are compact and robust grinders capable of handling the toughest of grinding jobs. Using the spindle lock, discs can be quickly and easily changed. For safety a slide switch controls the grinders with a 'quick-off' feature for immediate tool shut off for added safety.

A removable side handle improves control and comfort when the grinder is in use. External carbon brush caps allow the user to replace the motor brushes, as needed prolonging the life of the tool (Anticipated brush life of 140 hours, under normal use).

Weighing in it at only 1.4kg the Kobe Eiko compact angle grinders lightweight design is easy to handle and is excellent for overhead applications.

EGA115 115mm (4,1/2'') Angle Grinder 650W

Kobe Eiko™ EGA115 Angle grinder specification:
Power input: 650W.
No-load speed: 11,000rpm.
Disc size: (Dia)115 x (Bore)22mm.
Peripheral speed: 80m/s.
Supplied with side handle & wrench.
Weight: 1.4kg.

Available as:
110V Order code: KBE-279-0840K
240V Order code: KBE-279-0860K

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Straight Shank Suitable for Fein, Wolf and Kress. Bi-Metal High Performance (Pack 5)

Capacities: Steel 1.5 - 4.0mm, Aluminium 1.5 - 4.0mm, Plastics 8.0mm. Tooth pitch: 1.2. Effective length: 50mm. Wavy set teeth.

Kennedy® Sharpening Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

3 Square Aluminium Oxide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.