Paper Vacuum Bags (Pack of 10)

95332110
To suit Karcher T7/1 and T10/1 Dry Vacuum Cleaners.
N.B. Bags only. T10/1 machine illustrated not included.

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Inox BF Cut-Off Discs

Iron, chlorine and sulphur free. Thin 1.0 mm discs that enable you to achieve a uniquely clean cut in the shortest possible time whilst using minimum of force. vibration-free cutting, no thermal bluing and no burring. For use on thin sheet metal, steel cable, thin-walled profile sections, stainless steel pipes and non-ferrous metals. Max. operating speed: 13280 r.p.m.

Kobe Diamond Core Drill

Kobe Diamond core drills are a dry cutting, high performance diamond Core Drill. For use with arbor and guide rod (hex shank or SDS Plus) plus extension, if required.

Manufactured from tool grade steel for perfect concentricity. Can be used across a wide range of building materials such as: facing bricks, concrete blocks, breeze blocks, building blocks, hand made bricks and soft to medium hard natural stones. Mounting thread is 1/2" BSP.

Diamond Core Drill

Kennedy® Sanding Sheets

Industrial aluminium oxide sanding paper is "glue" bonded and suitable for use with hand sanding blocks and orbital sanders.
Fine, Medium and Coarse grades available.

1/3 Sheet

Dimensions: (W)93mm x (L)230mm. Pack of 25.

Professional Medusa Generators

A best selling range of Honda GX powered generators. All of these generators are fitted with heavy duty, maintenance free alternators. High fuel economy, fast, easy-pull starting. Low noise and vibration. Robust frame for protection and durability. High capacity fuel tank for extended running times. Hot spark electronic ignition. Low oil shutdown to prevent engine damage. Inclined cylinder and counter balance shaft to reduce vibration. Splash fed lubrication system. Cast iron cylinder sleeve to withstand wear. 230/115v sockets. Built in the UK. Optional LPG Conversion Kit - SIP Item 04495. One year warranty - engine covered directly by Honda.

04462 Professional MGHP3.0F - Full Frame

6.5HP Honda GX200 OHV engine, 3.6 litre fuel tank, 2.6hrs approx. run time. Continuous output 3.0KVA, max. output 3.75KVA.

Kennedy® Router Cutters

For veining work and decor of panels. Larger sizes suitable for chamfering and deep angled groove work.

Two Flute V-Grooving Bits

Kennedy® Velcro-Backed Sanding Discs

No spanners required to change discs. 100% of sanding disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied again and again. Unaffected by dust or moisture. Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

Plain (No Holes)

Diameter: 125mm.

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein DF Medium/Soft Aluminium Oxide

This is a popular fast-cutting stone which does not load easily. Good for all dies and moulds. Length 100mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W225. Grade: RA46. Diameter: 32mm. Length: 6mm. Max. rpm: 30,000. Weight per 10: 210g.