Kobe? Multi-Purpose Air Body Saw

BS920L
Produces burr free cuts without distortion. Ideal for body shop and sheet metal work. Teasing throttle for precise control.

Specifications:
1/4" NPT air inlet thread.
90PSI air pressure.
4CFM* air consumption.
Cutting capacity: 1.6mm (steel) to 2mm (aluminium).
Overall length: 235mm.

*Based on a 15 second cycle per minute average use.

Kobe Air Tools

Kobe Air Riveter Nose Piece for use with different sized rivets.

Air Riveter Nose Piece

Rotabroach SRC Standard Cutters

Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4" pilot bore and can be used in most magnetic drills. 700 N/mm2 material hardness. Fully ground M2 high speed steel cutters.

Kennedy® Linisher Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



100mm (4") Wide x 915mm (36") Long.

Kobe? Retractable Air and Water Hose Reel

For use on assembly lines, service vans, workshops, etc. Helps to eliminate air hose entanglement hazards in the workplace. Can be fixed to the wall or ceiling. UV stabilised impact resistant plastic case. Locking ratchet. Smooth retraction. 1.5m connection hose. Male inlet and outlet made from solid brass. High quality roll formed drive spring. PVC hose rated to 17bar. 160 pivot. Air tool hanging hole. Can be easily detached from the bracket.

HRR008 8mm x 12M Retractable Air & Water Hose Reel

Inlet/outlet hose connection 1/4 BSP.

SIA Fibre Discs

4819
Tough durable Zirconia grain with grinding aid to reduce heat build up and glazing. Strong fibre backing to give maximum grain support on arduous applications. Excellent life and cut to reduce down time and consumable costs, ideal for mild and stainless steel applications. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 180mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T244D)
Application: wood 60mm, plastics 50mm. For cutting curves.
Blade: HCS medium duty, side set teeth.
Tooth pitch: 4.0mm.

Effective length: 75mm.

Pack of 5.

York? Quick Change Surface Preparation Disc Kits

Multi purpose kits for grinding and stock removal applications such as weld grinding and finishing, rust removal. Suitable for use on mild contours. Designed for cleaning and finishing on all metals. Leaves a burr-free surface ready for painting or coating. Can also be used for the removal of light rust, oxides and coatings. Compatible with 3M ROLOC? system.

12 Piece 50mm Diameter

Multi-purpose kit containing: one of each surface preparation disc fine, medium and coarse. Two of each abrasive disc grades P36, P60, P80 and P120. One 6mm diameter shank to fit the backing pad.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Pointed Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.