York? Linisher Belts

York sanding belts to suit a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



150mm (6") Wide x 1090mm (43") Long.

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Rolls

Roll size: (W)38mm x (L)50 Metres. Available in several grades.

DeWalt Cordless Batteries

Least expensive cell technology. Has the least temperature sensitivity of the three battery types. A large number of charge cycles is possible.

DE9091-XJ 14.4v 2.0Ah NiCd Battery

Charger compatibility: DC011, DE9135, DE9112, DE9116, DE9117, DE9130, DE9216 and DE9219.

Bosch® 14.4V Cordless Drill/Drivers

Compact, lightweight, heavy duty drill drivers
Slim design, low weight, easy to handle
Extra strong planetary gearbox
Soft grip handle and switch
Improved motor cooling
Mid handle gives good balance
10mm single sleeve autolock keyless chuck
Charge Time 1 hour

Capacities
Steel 11mm
Wood 32mm
No load Speed 0-400, 0-1200rpm
Torque and Settings 35Nm-15
Weight 1.7kg
Accessories 2 Batteries 1.5Ah 14.4V/NiCd

GSR 14.4-2

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Power Tool Chisels

Suitable for air and electric hammers and breakers, for all classes of work.

Makita Style Chisels

For Makita: HM0810, HR3500, HR3520, 8035NB. 17mm Hex Shank with Round Tang & Round Retainer Recess.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

Surface Conditioning Discs

Reinforced Scotch-Brite web designed for cleaning and finishing on all metals. Leaves a burr-free surface for painting and coating for removal of light rust, oxides and coatings.
Maximum rpm.25mm Discs = 25000rpm.
50mm Discs = 23000rpm.
75mm Discs = 18000rpm.

Kennedy® Pin Spanners for Angle Grinders

Several types available. Weight 110g.

Pin Spanner

To suit Bosch, Osaki 115mm, Desoutter 308-354.
Pitch: 30.
Pin diameter: 3.4.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Blue Line - Fine

Cross cut blades, designed with a high TPI. Suitable for cross grain cutting solid wood giving a good finish.

Bosch Jigsaw Blades

Application: Coarse cutting. Hardwood, softwood & plastic60mm. Side set & milled teeth. Effective length: 75mm. Pitch: 3.0.

Carbon Steel For Wood & Plastics (Pack 5)