Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W212. Grade: RA60. Diameter: 22mm. Length: 6mm. Max. rpm: 33,000. Weight per 10: 150g.

Flexovit Grinding Wheels

A: A particularly tough aluminium oxide providing hard wearing wheels for general purpose, surface and off-hand grinding.

Type 1, Plain

Kennedy® Fibre Discs

Resin fibre, aluminium oxide sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure Kennedy sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)

Kennedy® Wire Wheels & Brushes

For hard to reach areas such as drilled holes, recesses and corners. For removal of burrs, rust and paint. 30 SWG.
Brush manufactured from Steel wire and holder and shank manufactured from galvanized steel.

Flat End Decarbonising Brushes

Impact Wrench 1/2? - 7000RPM

B7444
Suitable for production and assembly applications. Twin hammer mechanism. 1/2? square drive. Three position dial style speed regulator. Forward/reverse selection. Ergonomic and comfortable handle grip. Fixed inlet and exhaust.

Forward
Position 1: 4000rpm, position 2: 5000rpm, position 3: 7000rpm.

Reverse
Position 1: 3000rpm, position 2: 5000rpm, position 3: 7000rpm.

Specifications:
Model number: B7444.
Collet size: 1/2? (13mm).
Free speed: 7,000rpm.
Maximum torque: 813 ~ 542Nm (600ft/lbs)
Recommended air pressure: 6.2Bar (90PSI).
Air consumption: 4CFM* (113ltr/min).
Air inlet thread: 1/4? NPT.
Minimum air hose size (ID): 10mm (3/8?).
Noise level/sound pressure?: 83dBA.
Sound power level?: 90dBA.
Vibration level#: 6.8m/s2.
Overall length: 183mm.
Net weight: 1.94kg.

?Per Pneurop Standard Per EN ISO 15744:2002.
#Per EN 28927-2.

Action shots:
Vibration dampened rubber grip.
Three point adjustable air (speed) regulator.
One finger stop/start trigger operation.
Easy push button forward/reverse operation.

York? Nylon Interleaved Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Interleaved Wheel 50 x 50mm

Suitable for: Deburring, producing cosmetic finishes on most materials, rust removal, blending.

Model D330x1000, 0340-1007 3ph, 0340-1006 1ph

Rigid heavily ribbed, hardened and precision ground cast iron bed with V guideways. Camlock spindle nose D1-4. Hardened oil running headstock spindle with high precision, realignable tapered bearings. Guaranteed spindle nose runout less than 0.015mm. Closed quick action feed and screw cutting gears running in oil bath. Simultaneous engagement of lead screw & power feed levers is prevented by interlocking. Adjustable slip clutch of lead screw. Forward/reverse spindle switch. Safety switch with no-volt release, emergency stop and motor protection. Foot brake. Gap bed. Manufactured to DIN 8606 (Toolmakers Precision).

Specifications:
Centre height: 165mm.
Max swing over bed: 330mm.
Max swing over saddle: 198mm.
Max swing in gap: 476mm.
Length of gap: 115mm.
Distance between centres: 1000mm.
Width of bed: 187mm.
Spindle bore: 38mm.
Spindle nose: D1-4.
Spindle taper: MT 5.
Tailstock taper: MT 3.
No of spindle speeds: 8.
Range of spindle speeds: 70?2000rpm.
Leadscrew dia/pitch: 22mm, 3mm.
Cross feed: 0.033 ? 0.933mm/rev.
Longitudinal feed: 0.097 ? 2.713mm/rev.
Metric threads: 0.4 ? 7mm.
Imperial threads: 4 ? 56tpi.
Diametral threads: 8 ? 120dp.
Module threads: 0.2 ? 3.5mp.
Top slide travel: 85mm.
Cross slide travel: 170mm.
Motor power: 1.5kW.
Tool section: 16mm.
Size (LxWxH): 193 x 75 x 151cm.
Net weight: 600kg.

Magtron Magnetic Drilling Machines

Has a unique two speed power unit with variable speed control and a powerful magnet with a clamping force of 1410kg/3100lbs. Automatic safety is provided by revolutionary electronic switching system, supplied with 2 morse taper arbor, morse taper drift, safety chain. carabina hook, cutting oil, hexagon keys and carry case.

MBE40 Two Speed Variable Milling/Drilling System

Dimensions (H x W x L): 418mm x 100mm x 281mm. Power input: 1050W.

3M Scotch-Brite? Cut & Polish Rolls

A robust Scotch-Brite? roll for deburring and cleaning applications on all metals. It's flexibility allows you to work on a variety of applications. This can be used with 3M 935 Mini Mandrel for use in portable tools. 5m rolls.

3M 777F/707E File Belts

For grinding stainless, nickel alloy and titanium. 3M material bonded to a tough cloth backing. Incorporate a grinding aid to ensure long life and high cut rates on all metals. Can be used to blend scratches left by coated abrasive belts.



13mm Wide x 610mm Long.