York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Recessed hub design for maximum access in tight corners.

All wheels are supplied individually. (Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s).

6mm Shank

80mm Dia x 30mm Height 7,700 MOS (rpm)

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

40mm Dia x 20mm Height 15,300 MOS (rpm)

DeWalt DCD780M2 Compact Drill Driver Kitbox 18 Volt with 2 x 4.0ah Li-Ion Batteries

The DeWalt DCD780M2 is an 18 volt XR Li-Ion premium compact drill driver, featuring XR 4.0Ah Li-Ion battery technology. The ultra compact, lightweight design allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. The drill/driver has a two speed, all metal transmission for increased runtime and a longer tool life. A 14-position, adjustable torque control enables consistent screwdriving into a variety of materials with different screw sizes. Its 13mm single sleeve keyless chuck with automatic spindle lock ensures a quick and easy, one-handed bit change.

Specifications:
Voltage: 18V.
Battery capacity: 4.0 Ah Li-Ion.
Chuck capacity: 1.5-13mm.
Power output: 350W.
No load speed: 0-600 and 0-2,000/min.
Max torque: 60Nm.
Max. drilling capacity (wood): 38mm.
Max. drilling capacity (metal): 13mm.

Osaki™ Hobbyist Mini Machines

Osaki™ mini machines include a mini lathe, mini bench drill and mini milling/drilling machine. These are ideal for the hobbyist, their small size make them ideal for use in the home workshop/garage. Whilst being small they retain a lot of the features found on larger industrial machines, either as standard or available as accessories. For DIY use. Not warranted for industrial use.

Mini Metalworking Lathe

This little gem is ideal for model making etc. Supplied with a self-centring 3-jaw chuck, four-way tool post, swarf tray, rear splash guard, emergency stop button and chuck guard. A variety of useful accessories are available. Manufactured to meet European Machinery Directive 98/37/EC and is both CE and RoHS compliant.

Specifications:
Swing over bed: 180mm.
Distance between centres: 300mm.
Hole through spindle: 20mm.
Spindle taper: MT3.
Tailstock taper: MT2.
Spindle speed low range: 0-1100rpm +/-10%. High range: 0-2500rpm +/-10%.
Output power: 250W.
Range of threads: Metric 0.4-2mm (10 thread pitches) or Imperial 12-52 TP (8 thread pitches).
Net/gross weight: 37/40kg.
Packing size: 770 x 330 x 330mm.

FOR DIY USE
Not warranted for industrial use.

SIP Trade Airmate Hurricane 6 Compressor

05295
Light, easy to carry with oil free pump. Designed for ease of use. With sealed bearings and tough cover for duability. Integrated control panel with easy to read gauge. One year warranty.

Specifications:
Supply: 230v (13amp).
Motor: 1.5hp.
Air receiver: 6L.
Piston displacement: 6.4CFM.
Max. pressure: 118psi (8bar).
Weight: 15kg.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A8. Grade: RA46. Diameter: 21mm. Length: 45mm. Max. rpm: 20,000. Weight per 10: 370g.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

3" Bore

York? Resin Fibre Backed Sanding Discs

Aluminium Oxide general-purpose grade resin fibre backed, sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure York sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)

Makita Rotary Hammer drills

Makita HR2300 series models are 23mm (7/8") Hammer drills with a chuck adapted for SDS-PLUS shank bits. Features compact and lightweight tool design, ergonomic handle and many other features designed for more comfort and better control.

HR2300 23mm Rotary Hammer Drill SDS+

HR2300 Hammer Drill Specifications:
No Load Speed: 0-1200rpm.
Blows per minute: 0 - 4600ipm
Impact energy per stroke: 2.6Js
Vibration: Hammer Drilling: 15m/sec².
Input Wattage: 720w
Drilling capacity (Max):
Wood: 32mm.
Steel: 13mm.
Concrete (TCT bit): 23mm.
Concrete (TCT core): 68mm.
Concrete (Diamond core): 65mm.
Net weight: 2.7kg


Features include:
Double Insulation.
Variable speed.
With reversing function.
Torque limiter: The drill stops when the bit hits against reinforcements.
Improved dust collection.

110V Order code: MAK-275-6382A
240V Order code: MAK-275-6382B