Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein EDM Hard/Aluminium Oxide.

Specially formulated for EDM scale removal. Length 150mm.

Bosch® Professional Reciprocating Saw

GSA1300 PCE
For low-fatigue working, anti-vibration handle and mass balance. 1300-watt high-performance motor with Constant Electronic for the toughest applications. Pendulum stroke for fast sawing progress. SDS saw blade changing system for fast and convenient blade changes with one hand. Constant LED light for illuminating dark work areas. Tool-free adjustable saw stop. Metal hook for hanging up the tool during a work break. Rubber-coated gear housing for a secure and comfortable grip.

Specifications:
Rated power input: 1300W.
No-load stroke rate: 0-2900spm.
Weight: 4.1kg.
Saw, stroke length: 28mm.
Cutting depth: wood 230mm, metal profiles and metal pipes 20mm.

Available in 240V and 110V.

3M 734 Wet or Dry? Silicon Carbide Paper

Aggressive fast cutting waterproof silicon carbide paper, for use on paints, lacquers and fillers.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B131. Grade: RA80. Diameter: 13mm. Length: 13mm. Max. rpm: 34,000. Weight per 10: 50g.

York? Resin Fibre Backed Sanding Discs

Aluminium Oxide general-purpose grade resin fibre backed, sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure York sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)

Hitachi Power Tool Battery Chargers

Suitable for 3.6V Li-Ion batteries only. 30 minute charge (1.5Ah battery).
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

UC3SFL Battery Charger DB3DL

Kennedy® Bench Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Combination Aluminium Oxide

For workshop use. Ideal for sharpening chisels, plain iron and virtually any metallic implements. Available in two types.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Aluminium Backed (For Stainless Steel)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Plain (no holes)

Diameter: 150mm.

3M Scotch-Brite? Unitised Wheels

Produced by adhesively bonding and compressing web together to form a slab from which wheels are then cut. Work extremely well in deburring applications, will leave a very high quality fine finish.



Maximum RPM: 51mm Dia: 16,000. 76mm Dia: 12,000. 152mm Dia: 5,000. 203mm Dia: 4,000.