Paslode Nail/Fuel Packs

To be used with Paslode Impulse IM65 F16 Gas Brad Nailer.

Kobe™ Extended Spindle Die Grinder

GES2506L
For extra reach in "hard to get at" areas, extended spindle housing allowing two-handed operation, rear exhaust, safety lever throttle.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 248mm.
Collet size: 6mm.

*Based on a 15 second cycle per minute average use.

Hitachi 18V Angle Grinder

UC18YRSL fan cooled charger.
Side handle.
Abrasive wheel.
Carrying case.
Wheel diameter: 115mm.
Arbor: 22mm.
Charge time: 60min.
No-load speed: 9100/min.
Overall length: 296mm.
Weight: 1.8kg.

G18DSL/JW 18V Angle Grinder with 1 x 2.0AH LI-ION Batteries

York? Cartridge Rolls

Spirally wound Aluminium Oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used to secure the abrasive to the tool.

Straight Type

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

York? Non-Woven Abrasive Hand Pads

A range of non-woven fibre hand pads for cleaning, blending and finishing applications. Size: 155 x 225mm.
Supplied in packs of 10.

Green - fine

General-purpose hand pad for cleaning and finishing. It can also be used for lacquer de-nibbing and mat finishing on solid surfaces.

York? Flexible Abrasives

Abrasive covered foam for general-purpose sanding on wood.

Single-Sided Pads

Single-sided highly flexible abrasive coated sponge pad. Will conform to the shape of any contoured surface. Available in three different grades. Size: (W)110 x (L)140 x (D)5mm.

Hitachi Angle Grinders

Hitachi s G12SS angle grinder is compact and lightweight with a glass reinforced polymide resin body and die cast aluminium gear casing. Weighing just over 1kg and measuring only 255mm (10'') long, it allows for optimal control while providing a high power to weight ratio. Ideally suitable for cutting, grinding, de-rusting, wire brushing and sanding.

Features:
Spindle lock, provides easy and quick disc changes.
External brush caps allowing for quick in-field service of brushes.
Ball bearing construction for smooth operation and long life.
Tool rest, conveniently located to protect the switch from accidentally turning on and prolonging tool life.
Slide switch, easy to use with a quick-off feature to shut the tool off immediately for added safety.
Removable side handle, improves control and comfort.

G12SS 115mm (4 1/2") Angle Grinder

G12SS angle grinder specification:
Voltage: 110V.
Wheel diameter: 115mm (4 1/2").
Power input: 580W.
No load speed: 11,000rpm.
Spindle type: M14x2.
Spindle lock: yes.
Weight: 1.36kg.

Kemet Diamond Compounds

Kemet Diamond Compounds are formulated and manufactured to the highest standards. The KD formula ensures a stable carrier is provided, which gives the fastest cutting and polishing action. Type W (water) and OS (oil) lubricants can be used to extend the life of the compound. Kemet Diamond Compound is suitable for lapping and polishing most materials including Steels, Carbides and Ceramics.

Lapping & Pre-Polishing

Canning-Lippert Preparation Mops

Stapol 100% sisal mops with cotton interleaving. Used for heavy duty mopping operations on steel and non-ferrous metals. Also used for removing grinding marks left from previous abrasive operations. Available untreated or in 3 grades of treated mops - simpol, orange and blue, all increasing in hardness and composition retention respectively. Orange and blue treatment available on request.

Stapol Untreated

Product Number: 0401-284. Diameter: 10". Width: 1". No. of Sections: 2. Weight: 560g.