Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Trend Router Cutters

For drilling slotting, cutting aluminum anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes.

Single Flute Helical

3M Scotch-Brite Hand Pads

A range of Scotch-Brite Hand pads designed for cleaning, blending and finishing applications on a variety of metals. 155 x 255mm.
7440 Brown ACRS: Heaviest duty pad in the range. Used for light deburring, cleaning and finishing applications.
7446 Grey SCRS: For heavy finishing and blending.
7486 Dark Green ACRS: For medium to coarse finishing and blending.
7496 Green AFIN: A general-purpose conformable hand pad which gives a slightly coarser finish than the Maroon 7447 hand pad.
7447 Maroon AVFN: General-purpose hand pad for cleaning and finishing. It can also be used for lacquer de-nibbing and mat finishing on solid surfaces.
7448 Grey SULFN: Ultra fine pad for light finishing on all minerals as well as lacquer de-nibbing.
7441 White Type T: Non-abrasive. For the removal of oxides and coatings, produces a scratch-free finish.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

York? Depressed Centre Grinding Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ?free hand? or wet grinding. Optimum angle for use 25 to 35.

Type 27

Grade A30/A24. For general-purpose use on metals.

Makita Angle Grinders

Small diameter Angle grinders with ergonomically best possible barrel grip. Regardless of whether the user grips motor housing or rear cover, the extra-ergonomic barrel grip fits any user’s palm and fingers perfectly, and provides easy and comfortable handling while minimizing hand fatigue and pain.

GA4530 115mm (6”) Angle Grinder

GA4530 115mm (6”) Angle Grinder Specifications:
Bore Diameter: 22.23mm.
Wheel Size: 115mm (6”).
Input Wattage: 720w.
No Load Speed: 11,000rpm.
Net weight: 1.8kg.

Features Include:
Small gear housing for easy handling and manoeuvrability.
Machined bevel gears.
Powerful 720W motor with excellent heat-resistance.
Ergonomic 20 degree side grip angle.

110V Order code: MAK-275-6107G
240V Order code: MAK-275-6107H

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Makita SDS Rotary Hammer Drill

Max in concrete: 24mm
Max. in steel: 13mm
Max in wood: 32mm
Joules: 2.7Js
Blows per minute: 0-4500bpm
No Load Speed: 0-1100rpm
Net weight: 2.5Kgs

Standard equipment: depth rod side handle case

Available in 240V and 110V, in models with chucks or keyless chucks.

HR2460

York? Cartridge Rolls

Spirally wound Aluminium Oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used to secure the abrasive to the tool.

Taper Type

Tapered for angles, corners and irregular or concave surfaces.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A21. Grade: RA60. Diameter: 25mm. Length: 25mm. Max. rpm: 34,000. Weight per 10: 380g.