3M EXL Unitised Discs Roloc? XL-UR

All products feature a unique twist on/twist off fixing system. Grade, size or product can be changed quickly and easily. Discs have no centre nut allowing all of the disc surface to be used, reducing production costs. Suitable for use with all types of portable drills, grinders, etc. Can be used "on-face" as a disc or "on-edge" as a wheel.

SCRUBTEC 233 Combi Scrubber Dryer

SCRUBTEC 233
Walk behind mains powered 330mm scrubber dryer, with a two tank system, perfect for small areas and narrow isles. Cleans both forward and backward. Clear lid on recovery tank makes it easy to see the cleaning result. Equipped with two disc brushes/pads giving 18kg down pressure. Height adjustable and folding handle.

Vacuum motor power: 550W.
Brush pad diameter: 165mm.
Brush speed: 200rpm.
Squeegee width: 385mm.
Dimensions (L x W x H):665 x 390 x 460mm.
Weight: 22kg.

Kennedy® Router Cutters

With ball bearing guide. For mounting slotting cutters. Complete with ball bearing guide which also ensures a constant depth of slot.

RN Classical Bits

Kennedy® Slip Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Aluminium Oxide

For sharpening curved edge cutting tools.

Cubitron™ Fibre Sanding Discs

Cubitron™ II Fibre Discs are made with revolutionary 3M precision shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Get more productivity, throughput, disc life, comfort and grinding speed.

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Industrial Steel Wool

100% oil free - leaves no stains on wood or other porous surfaces. Versatile - available in a choice of seven grades for industrial, household, garden and trade use. For woodwork and preparation of polished surfaces between coats use the wire wool dry. For removing paint spots - use with a white spirit, turpentine or liquid paint remover. Always wear gloves. For household work - use with soap and water as required. Suitable for use with metallic pots and pans. 450gm (1lb) per pack.

Makita 14.4V Drill Driver

Max. in Steel: 10mm
Max in Wood: 25mm
Torque Settings S/H Nm: 16 Drill
Max. Torque: 18/30Nm
Max. size Wood Screw: No. 12
No Load Speed: H: 0-1300 L: 0-400
Net Weight: 1.5kgs
Charging Time: 30min

Supplied with 3 batteries

6271DWPE3

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W158. Grade: RA120. Diameter: 6mm. Length: 3mm. Max. rpm: 90,000. Weight per 10: 20g.

Hitachi 16mm Impact Drill - DV16V

Powerful 590W motor, aluminium die-cast metal gear box housing. Easy to operate 2-finger sized trigger with reversible and variable speed control dial. Compact design that ensures high operation efficiency including a comfortable, easy to grip handle. Supplied with side handle, depth gauge and carry case

Power input 590W
No load speed: 0-2,900rpm
Capacity: steel 13mm, wood 25mm, concrete 16mm
Chuck: 13mm keyless
Length: 269mm
Weight: 1.5kg

Available in 240V and 110V.