York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Aluminium Backed (General-Purpose)

127mm Dia x 22mm Bore 12,000 MOS (rpm).

Nilfisk Alto® Wet & Dry Vacuum Cleaner

Multi 20CR
Use this wet & dry vacuum cleaner for indoors and outdoors. Perfect for the home, car, workshop and hobbyists who want to suck up water and leaves.

Specifications:
1400 watt motor.
'Push&Clean' semi automatic filter cleaning means it takes only seconds to clean your filter, ensuring continued high performance.
Easy storage of accessories.
Cable rewind.
Hose storage hook.
Wet and dry filter.
20L container.
Chassis with two castors and two 2 "alu look" wheels.
Quick park.
Automatic blow function.

SDS Plus Rotary Hammer Drill

No load speed: 1100rpm
Drilling capacities: steel 13mm, wood 32mm, concrete TCT 28mm/Core 80mm
Joules: 2.9
Weight: 3.3kg

3M 734 Wet or Dry? Silicon Carbide Paper

Aggressive fast cutting waterproof silicon carbide paper, for use on paints, lacquers and fillers.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Bosch 9" Angle Grinders

GWS 22-230
Powerful 2200 W Champion motor for fast work progress. Low weight for optimum handling. Twist-proof protective guard - reliably protects the user if the grinding disc breaks. Restart protection prevents the tool from automatically restarting after a power cut. Armoured coils protect the motor against sharp grinding dust that ensure long lifetime. Double-sealed ball bearings and the especially sturdy gearing guarantee a long lifetime.

Specifications:
Rated power input: 2200W.
No-load speed: 6500rpm
Grinding spindle thread: M14.
Main handle: straight.
Disc diameter: 230mm.
Weight: 5.2kg.
Disc supplied separately.

Available as 240V or 110V.

Norton? Aluminium Oxide Rolls

In a useful dispensing pack with a perforated edge to facilitate cutting to required size, these high quality aluminium oxide rolls are ideal for a range of hand-sanding jobs where greater flexibility is required.

Rolls

Roll size: (W)25mm x (L)25 Metres. Available in several grades.

Kemet Diamond Compounds

Kemet Diamond Compounds are formulated and manufactured to the highest standards. The KD formula ensures a stable carrier is provided, which gives the fastest cutting and polishing action. Type W (water) and OS (oil) lubricants can be used to extend the life of the compound. Kemet Diamond Compound is suitable for lapping and polishing most materials including Steels, Carbides and Ceramics.

Lapping & Pre-Polishing

DeWalt Cordless Batteries

Least expensive cell technology. Has the least temperature sensitivity of the three battery types. A large number of charge cycles is possible.

DE9071-XJ 12V 2.0Ah NiCd Battery

Charger compatibility: DC011, DE9135, DE9112, DE9116, DE9117, DE9130, DE9216 and DE9219.

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Inox BF Cut-Off Discs

Iron, chlorine and sulphur free. Thin 1.0 mm discs that enable you to achieve a uniquely clean cut in the shortest possible time whilst using minimum of force. vibration-free cutting, no thermal bluing and no burring. For use on thin sheet metal, steel cable, thin-walled profile sections, stainless steel pipes and non-ferrous metals. Max. operating speed: 13280 r.p.m.

NiMH Batteries - O-Type

260733596 18.0V 3.0Ah GML24V/VCD, AL2422DC, AL2425DV, AL2450DV, AL2498FC