Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

SDS Plus Rotary Hammer Drill

Blows per minute: 4050bpm
No load speed: 1050rpm
Drilling capacities: concrete 22mm steel 13mm wood 32mm
Joules: 2.3Js
Weight: 2.5kg

Available in 240V and 110V, in models with chuck or keyless chucks.

High productivity, low consumption & ergonomic.

CP7769
3/4” composite impact wrench. 1440ft.lbs (1950Nm) of maximum torque in reverse. Low consumption air motor at 31cfm (14.7l/s). Insulating and lightweight composite handle. S2S easy forward reverse. Lightweight with a magnesium clutch housing. Universal and durable twin hammer mechanism. Full teasing developed trigger. Maximise operator comfort with a productive and lightweight tool. Energy saving.

Output drive: 3/4”.
Free speed: 7,000rpm.
Working torque range: 407 - 1464Nm.
Maximum torque: 1950Nm.
Average air consumption: 7.75cfm.
Air consumption @ load: 31cfm.
Air consumption @ load: 14.7l/s.
Air inlet NPTF: 3/8”.
Sound pressure: 97dBA.
Vibration a (ISO-28927-2): 12.6m/s2.
Vibration K (ISO-28927-2): 3.4m/s2.
Length: 214mm.
Weight: 3.4kg.

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 41 Flat Reinforced Cutting

For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.
Grade A24 - For general purpose cutting on metals.
Grade C24 - For general purpose cutting on stone.

Air Tool Chisels with 0.401" Shank

For All Brands of Portable Air Chisels including CP, Desoutter, Kobe, Toku and YK.

Bosch Planer

Bosch's GHO 26-82 planer is a handy tool with lots of power! It?s a small machine with a powerful 710W motor for all on-site fitting work. It has the fastest and least expensive blade changes on the market due to durable Woodrazor blades and the easiest possible adjustment. The view of the work piece is unimpaired as chip clearance can be directed to the left or right, as required.

Features:
3 V-grooves for easy and flexible chamfering.
Workpiece is protected thanks to parking rest.
Lock-on switch for left-handers and right-handers.

GHO 26-82 Planer

GHO 26-82 Specification:
Rated power input: 710W
Power output: 400W
Adjustable chip thickness: 0-2.6 mm
Adjustable rebating depth: 0-9mm
No-load speed: 16,500rpm
Length: 284mm
Width: 163mm
Height: 173mm
Planing width: 82mm
Weight without cable: 2.6kg.

Available as:
110V Order code: BCH-266-7400E.
240V Order code: BCH-266-7400F.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

3M Scotch-Brite? Clean & Finish Rolls

A Scotch-Brite roll designed for light cleaning, finishing and deburring operations. Available in very fine grades for even finer finishes. The roll can be easily torn to convenient lengths. Available in 10M rolls in a choice of 100mm, 125 and 150mm widths.

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

3M Scotch-Brite? Clean & Finish Rolls

A Scotch-Brite roll designed for light cleaning, finishing and deburring operations. Available in very fine grades for even finer finishes. The roll can be easily torn to convenient lengths. Available in 10M rolls in a choice of 100mm, 125 and 150mm widths.