Kennedy® "Contractor Packs" Jigsaw Blades

The most popular 'T' style blades bulk packed in 20's for economy. Supplied in telescopic 'pocket' cases that are ideal for the industrial user.

HCS - Medium Duty (Pack 20)

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W151. Grade: RA120. Diameter: 5mm. Length: 3mm. Max. rpm: 100,000. Weight per 10: 20g.

Kennedy® Power Tool Chisels

Suitable for air and electric hammers and breakers, for all classes of work.

Hilti Style Chisels

For Hilti: TE54, TE72, TE92, TE504. 18mm Round Shank with Hilti Direct Fit Retainer.

York? Flexible Abrasives

Abrasive covered foam for general-purpose sanding on wood.

Sanding Blocks

Abrasive coated semi-flexible sponge, coated on all four surfaces. Suitable for sanding 90 contoured surfaces. Available in four different grades. Size: 96 x 69 x 25mm.

Bosch Jigsaw Blades

Bimetal Jigsaw Blades.
Ground Teeth
Applications:
Laminated boards: 2-30 mm.
Hard wood, Laminates: 2-30 mm.
Plastics, Epoxy: 30 mm.
Effective Length: 77 mm.
Tooth Pitch: 1.7 mm.
Long life. Clean cut.

Flexible Back Bi-Metal For Wood & Plastics (Pack 5)

Kennedy® Flexible Backing Pads For 'Velcro' Sanding Discs

Suitable for use with Kennedy® 'Velcro-backed' sanding discs.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Oval Shape

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

18V Cordless Impact Wrench

Same fastening torque in forward and reverse rotations with full torque at 6 seconds after seating. Compact design provides more control and maneuverability. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact. The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are joined with vibration absorbing cushion rubbers. The large bumper protects workpiece from scratches,increasing maneuverability. Ergonomically designed handle with rubberized soft grip provides more control and comfort. Easy-to-operate LED light for illuminated operation can be turned on or off with an independent switch, and features an over-discharge-protective circuit. Also features a hanging hook.

Capacity: Standard bolt:M12 - M22; High tensile bolt: M12 - M16
Impacts per minute: 2,200
No load speed: 1,600rpm
Maximum torque 440Nm
Dimensions (L x W x H) 266mm x 82mm x 290mm
Net weight: 3.4kg