Bosch Plunge Router - POF1200AE

Powerful 1200W motor for demanding tasks in all types of wood. Material-specific preselection of the speed with setting wheel and accelerator switch. Easy and fast router bit changes due to integrated spindle lock. Easy, tool-free insertion of the template guide.
Includes dust extraction port with dust bag, transparent chip guard protects against flying chips, ergonomic design with softgrip for convenient and safe working.

Voltage: 240V
Power input: 1,200W
Power output: 650W
Toolholder (supplied): 6mm/8mm/1/4"
No load speed: 11,000 - 28,000 rpm
Maximum router cage stroke: 55mm
Weight: 3.4kg

Hitachi Li-Ion Batteries

Much higher capacity than even NiMH. Charge loss during storage is less than half that of NiCad. No memory at all, no periodic conditioning is needed.

BCL1430 Battery 14.4V 3.0Ah Li-Ion

Charger compatibility: UC18YRL/J0, UC24FYA and UC14YFA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

Creusen 150mm (6") Bench Grinder

With a standard 5 year warranty, even for industrial usage, and designed for engineering/industrial applications that require robustness, reliability and efficiency the Creusen is a premium quality grinder. Fitted with maintenance-free motors with dynamically balanced rotors, they are virtually noise-free. Complete with two adjustable eye guards and tool rests, fitted with spark arrestors and anti-vibration mounts.

No load speed: 3000rpm (all models)

Spindle diameter: 15mm

3M 777F/707E File Belts

For grinding stainless, nickel alloy and titanium. 3M material bonded to a tough cloth backing. Incorporate a grinding aid to ensure long life and high cut rates on all metals. Can be used to blend scratches left by coated abrasive belts.



20mm Wide x 520mm Long.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Additional Side Plates for Circular Brushes

Supplied free of charge with circular brushes. Please specify when ordering.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Blue Line - Fine

Cross cut blades, designed with a high TPI. Suitable for cross grain cutting solid wood giving a good finish.

3M Roloc? Brush Products

Designed for use on portable tools and featuring the convenient Roloc twist-on, twist-off fixing system.

Combi Flap Brush R

Alternate flaps of coated abrasive cloth and Scotch-Brite? finishing web, for blending and cosmetic finishing of metals.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Flame Shape

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Trend Router Cutters

For drilling slotting, cutting aluminum anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes.

Single Flute Helical

Hitachi Power Tool Battery Chargers

Suitable for 7.2 - 14.4V Li-Ion/NiMH/NiCd batteries. 30 minute charge (1.4Ah battery).
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

UC14YFA Battery Charger