Medusa Full Frame Generators with Long Range Fuel Tanks

A best selling range of Honda GX powered generators with long range fuel tanks for extra long running times. All of these generators are fitted with heavy duty, maintenance free alternators. High fuel economy, fast, easy-pull starting. Low noise & vibration. Robust frame for protection and durability. High capacity fuel tank for extended running times. Hot spark electronic ignition. Low oil shutdown to prevent engine damage. Inclined cylinder and counter balance shaft to reduce vibration. Splash fed lubrication system. Cast iron cylinder sleeve to withstand wear. 230/115v sockets. Built in the UK. Optional LPG Conversion Kit - SIP Item 04495. One year warranty - engine covered directly by Honda.

04468 Professional MGHP3.0FLR

6.5HP Honda GX200 OHV engine. Continuous output 3.0KVA, maximum output 3.75KVA. 12 litre fuel tank, 9 hours approximate run time.

Silicon Carbide Grinding Wheel to suit drill sharpener

For use with the Drill Bit Sharpener MTS256-2001A.

Hitachi 16mm Impact Drill - DV16V

Powerful 590W motor, aluminium die-cast metal gear box housing. Easy to operate 2-finger sized trigger with reversible and variable speed control dial. Compact design that ensures high operation efficiency including a comfortable, easy to grip handle. Supplied with side handle, depth gauge and carry case

Power input 590W
No load speed: 0-2,900rpm
Capacity: steel 13mm, wood 25mm, concrete 16mm
Chuck: 13mm keyless
Length: 269mm
Weight: 1.5kg

Available in 240V and 110V.

Kennedy® Flexible Backing Pads

Suitable for use with all portable and air disc sanders. Recommended for use with Kennedy® abrasive discs.

Makita 1/2" Impact Wrench

6904VH
2-speed variable speed reversible impact wrench. Lightweight design (1.8kg) for comfort and control. 32mm maximum socket size. Supplied with 3 sockets (17x39, 21x41 & 26x45) and carrying case.

Capacities:
Standard bolt: M10 - M16 (3/8" - 5/8"),
Drive size: 1/2" Square.
High tensile bolt: M10 - M12 (3/8" - 1/2").
Input wattage: 360W.
No load speed: High 0-2400rpm, Low 0-2100rpm.
Impacts per minute: High 0-3000, Low 0-2500 Max.
Fastening torque: High 196Nm, Low 147Nm.
Overall length: 265mm.
Weight: 1.8kg.

Available in 240V and 110V.

Kobe Bench Grinders

The Kobe GB150 is an Industrial quality bench grinder suitable for the professional user.

Features include:
Adjustable tool rest and spark deflector.
Maintenance free motor.
Eye shield.
Smooth and quiet operation.
Supplied with one 36 grit and one 60 grit wheel.

CE approved.
GB150 150mm (6") Bench Grinder
GB150 Bench Grinder Specification:
Voltage: 240V.
Mains Frequency: 50HZ.
Power: 1/2HP
Power Input: 385W
No load Speed: 2800rpm
Grinding Wheel Diameter: 150mm (6”).
Grinding Wheel Width: 6-25mm
Shaft dia: 22mm
Weight: 11Kg

What "Practical Classics" magazine say..."Best Buy"

"Owners of small benches beware: this grinder is enormous – nearly 400mm wide and a hefty 15.5kg in weight. This is about as big as a 150mm-wheel bench grinder gets, but this machine isn't overweight, it's just been built to last. Materials are all top notch, even the spark shields are a cut above the rest – big, thick and as clear as glass to look through. The Kobe gets up to its unloaded working speed of 2,800rpm in less than three seconds and this well-balanced unit delivers a virtually vibration-free performance. The 385W motor simply will not stall. This is particularly good news if you plan to fit high drag accessories like a wire wheel – you can bust classic car rust with impunity. We also like the fact that the Kobe needs only minimal assembly – just the spark shields need to be fitted, and the bolts are already in place. This is a lot of workshop bench grinder for the price."

DeWALT Cordless Drill Drivers

DC988KPD 18V Combi Hammer Drill

The DeWALT DC988KB 18V Hammer drill Driver has up to 52Nm of sustained torque for maximum performance & a 13mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change with one hand, an electronic brake adds extra operator control with the high performance fan cooled motor with replaceable brushes giving maximum power and durability, the all metal gearing allows for efficient power transmission and longer tool life.

With three speed settings for optimum performance in high torque, normal use and high speed applications & 22 position adjustable torque control for uniform results and optimised precision when screw driving.


DW920 Heavy Duty 7.2V In-Line Driver

Two Position Drill Driver, Hinged handle with position lock for two grip positions.

15 position adjustable torque control for consistent screw driving into various materials with different screw sizes, variable speed & reverse switch for added versatility, fitted with an electronic motor brake for better control. Includes a heavy duty quick release chuck.

DC988KPD-GB 18V XRP Combi Hammer Drill and DW920 Heavy Duty 7.2V In-Line Drill Driver

Specification 18V DC988KPD Combi Drill:
No load speed: 0-450rpm/0-1450rpm/0-2000rpm
Beats per minute: 0-7650bpm/0-24650bpm/0-34000bpm
Torque settings: 22Nm
Maximum torque: 52Nm
Electronic brake
13mm keyless chuck
Maximum drilling capacity wood 50mm, metal 13mm, masonry 16mm
Multi position handle
Weight 2.7kg

Supplied with: 2x Ni-MH 18V (2.6Ah) and charger.


Specification DW920 7.2V Heavy Duty In-Line Driver:
Tool holder 6.35mm Hex
Power output 125w
No load speed 0-500rpm
Maximum torque 9Nm
Net weight 1kg

Supplied with: Battery: 1x Ni-CAD 7.2V (1.25Ah),
Battery Charger.
Entire package is supplied in one robust carry case.

Norton Depressed Centre Reinforced Cutting & Grinding Discs

A range of discs for all angle-grinding of both metal (aluminium oxide) and stone (silicon carbide).

York? Non Woven Abrasive Roll

Non-woven roll for cleaning, blending and finishing applications.

Black - Medium

Size: 100mm x 10m.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.