3M Roloc? Wheel Products

Designed for use on portable tools and featuring the convenient Roloc+ twist-on, twist-off fixing system.

EXL Unitised Wheel R

Compressed EXL web for deburring and finishing. Features a highly flexible construction which is aggressive yet does not undercut or gouge parts.

Karcher Commerical Pressure Washers

The Karcher HD 6/13 C pressure washer suitable for high performance cleaning of machinery, vehicles or yards on a daily basis. High water flow and pressure rates ensure thorough cleaning results even with stubborn dirt, while the variable pressure and water flow rate ensure quick, efficient results. Featuring a dirtblaster nozzle for faster cleaning of tough dirt, and a three-way nozzle that enables the water jet to be adjusted quickly between a high-pressure pencil jet, a high-pressure fan jet and a low-pressure fan jet. Ideal for fast and tough cleaning jobs on the farm, in the workshop and in car fleets and dealerships.

Features and Benefits:
3 piston axial pump with brass water inlet and cylinder head for long service life.
Automatic pressure controlled shutdown upon trigger release for low energy consumption.
Adjustable aluminium push handle provides easy maneuverability and accessory storage.
Easy Press trigger gun, ergonomically shaped to reduce operator fatigue.
Integrated accessory storage on the back of the unit with additional cable fixing.
Dirt blaster nozzle increasing cleaning performance and covering a larger area.
Triple nozzle providing optimum cleaning flexibility and effortless change over of cleaning jets.

HD 6/13 C Cold Water Pressure Washer

Specification HD 6/13 C:
Power supply (Ph/V/Hz): 1/240/50
Water flow rate: 230-560 l/h
Pressure: 30-130/3-13(bar/MPa)
Max. water feed temp: 60°C
Connected load: 2.7kW
Weight: 24.5Kg
Dimensions: 375 x 360 x 935mm (LxWxH)

Kennedy® Linisher Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



50mm (2") Wide x 1520mm (60") Long.

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

Plain (no hole)

Diameter: 150mm.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Polishing

Provides tight and compact fitting for tie-on bonnets.

Super Polyurethane Support Pad

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HSS - Heavy Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T227D)
Application: steel 3 - 6mm, aluminium 3 - 15mm, plastics 30mm.
Blade: HSS heavy duty, side set teeth. For cutting curves.
Tooth pitch: 3.0mm.
Effective length: 75mm.

Li-Ion Batteries

Straight - 10.8V, 1.6Ah

Wet & Dry Vacumm Cleaner

A small, lightweight, powerful helper for picking up Wet & Dry debris. The light weight makes it easy to move around. 1300 watt motor will pick up any debris you want to get rid of. Two large wheels at the back and a castor in front make the machine very stable. New Fleece Filter Bag material allows you to pick up moist material without ruining the filter bag. The standard wet filter protects your turbine for a long lifetime. The built in accessory holder provides storage for your accessories so they are always at hand. Ergonomic grip so you'll have a balanced machine when you carry it around. 230 volt

Buddy 15

Ingersoll-Rand Air Speed Ratchet Wrenches

Specifications:
Standard bolt capacity: 10mm - 50ft.lbs max.
Variable speed, lever throttle 160rpm.
Weight 2.5lbs.
360 adjustable air exhaust.
Overall length: 267mm (10.5").
Durable, strengthened heads for long life.
Available with 3/8" or 1/4" square drives.

107XPA - 3/8" Square Drive