Star Spray Gun Accessories

Includes replacement air valve, valve spring, needle spring and o-rings.

Repair Kits

Standard Duty

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T101BR)
Application: wood 50mm, plastics 30mm, cuts on down stroke.
Blade: HCS medium duty, tapered and ground.
Tooth pitch: 2.5mm.

Effective length: 64mm.

Pack of 5.

Mixer Drill

Mixer, complete with side handle, wrenches and 220mm paddle. Ideal for mixing paints plaster, tile cement and filler.

Dimensions: Shaft 12mm
Max Bit Diameter: 220mm
Dimensions: Tool holder shank M14
No Load Speed: 550rpm
Input wattage: 850w
Weight: 3.7kgs

Available in 240V and 110V.

Kobe? Shear Head Only

Produces burr free cuts without distortion. Ideal for body shop & sheet metal work. Suitable for use with Kobe SH120 rapid cutting metal shear.

Ingersoll-Rand Heavy-Duty Air Speed Ratchet Wrench 1/2" Square Drive

1099XPA
Beefy head design, outlasts competitive wrenches 2:1. Variable power using button throttle 76 ft.lbs max. 220rpm, twice the speed of some others. Easy control in tight places, adjustable exhaust, avoids blow-back to face.
Overall length: 305mm.
Weight 1.4kg.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez D.S. Medium/Soft Aluminium Oxide

This is a popular, fast-cutting stone which does not load easily. Good for all dies and moulds. Length: 150mm.

Bosch Jigsaw Blades

Application: Softwood, chipboard, wood core plywood, fibre boards 5-50mm, doors & worktops <50mm. Side set & ground teeth. Effective length 74mm. Pitch: 4.0.

Carbon Steel For Wood & Plastics (Pack 5)

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Pointed Tree

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.

York? Fibral XL Unitised Wheels

Produced by adhesively bonding and compressing web together to form a slab from which wheels are then cut.
Maximum rpm: 51mm dia: 16,000rpm, 76mm dia: 9,500rpm, 152mm dia: 4,700rpm.

XL Unitised Wheels

Size: 152 x 6 x 12.7mm.