York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

York? Velcro-Backed Sanding Sheets

Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

7 Hole. Dust Extraction Type

Size: 165mm x 75mm.

York? Polishing and Lapping

The York? felt bob kit contains a multitude of shapes for all those difficult places to buff and polish. Made of a medium hardness felt, these bobs are ideal for use in die grinders, electric drills and air drills. The mandrels are exactly centred for true-running operation, use with greaseless, or standard buffing compounds.

7 Piece Felt Bob Set

Contents:
Cylindrical 3mm shank: 6 x 14mm, 12 x 7mm, 12 x 24mm and 25 x 7mm. 6mm shank: 12 x 24mm and 24 x 24mm.
Cylindrical ball nosed 3mm shank: 9 x 14mm.
Supplied in wooden storage box.

Engis Hyprez Five Star Diamond Compounds

Hyprez Fivestar combined formula compound provides the unsurpassed cutting capability of natural diamond with the impact resistance of manufactured diamond. Formulated to withstand severe lapping conditions, the use of a stable carrier ensures sustained particle suspension throughout the process and an even surface coverage improving impregnation of laps. Suitable for use with Hyprez type OS (Oil Soluble) or Type W (Water Soluble) lubricants to meet specific requirements of material and surface finish. The Hyplicator dispensing syringe allows a precisely measured amount of compound to be applied, preventing contamination and wastage.

Lapping & Pre-Polishing

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Flame Shape

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Bench Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Single Grit Silicon Carbide

For workshop use. Ideal for sharpening chisels, plain iron and virtually any metallic implements. Available in two types.

Dronco Diamond Cutting Blades

A top end quality product gives a good cutting performance on both hard and abrasive materials. This blade also cuts re-inforcements. No cooling breaks required. Can be used dry or wet cutting. Laser welded

Evolution Cool Formula

Hitachi Power Tool Battery Chargers

Suitable for 10.8V Li-Ion batteries only. 60 minute charge (1.5Ah battery).
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

UC10SFL/J0 10.8V Battery Charger

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Makita Rotary Demolition Hammer SDS Max AVT

Low vibration enables much greater utilization by one operator. Electronic-power-control for greater comfort. Torque-limiter for additional operator protection.

HR4011C

Max in Concrete: 40mm
Max Core Diameter (TCT): 105mm
Joules: 9.5Js
No Load Speed: 235-480rpm
Input wattage: 1,100w
Net Weight: 6.4kg
Blows per minute: 1,350-2,700bpm

Standard Equipment;
Bit grease, depth rod and side handle.

Available in 240V and 110V.