3M 777F/707E File Belts

For grinding stainless, nickel alloy and titanium. 3M material bonded to a tough cloth backing. Incorporate a grinding aid to ensure long life and high cut rates on all metals. Can be used to blend scratches left by coated abrasive belts.



13mm Wide x 457mm Long.

3M Flap Discs 566A

Good performance at an economical price. Available in P120 for finer blending, refining and finishing work.

Applications: weld grinding, stock removal, deburring, deflashing, gate removal, edge chamfering, cleaning, blending, finishing.
Materials: all metals.
Mineral: alumina zirconia.
Backing: X-weight cotton cloth on reinforced glass fibre resin.
Coating: closed.
Bond: resin.

Conical Flap Discs

Size: 100mm.
P40 grit.

3M Sanding Sponges

3M Sanding Sponges offer a variety of grades and flexibilities for contour sanding on woods and lacquers.

Softback Sponge - 115 x 140 x 5mm

This sponge is coated on one face. At just 5mm thick it is the most conformable of all the sanding sponges and is available in three different grades.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 600A. 6 Hole.

Diameter: 150mm.

3M 734 Wet or Dry? Silicon Carbide Paper

Aggressive fast cutting waterproof silicon carbide paper, for use on paints, lacquers and fillers.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

3M Scotch-Brite Hand Pads

A range of Scotch-Brite Hand pads designed for cleaning, blending and finishing applications on a variety of metals. 155 x 255mm.
7440 Brown ACRS: Heaviest duty pad in the range. Used for light deburring, cleaning and finishing applications.
7446 Grey SCRS: For heavy finishing and blending.
7486 Dark Green ACRS: For medium to coarse finishing and blending.
7496 Green AFIN: A general-purpose conformable hand pad which gives a slightly coarser finish than the Maroon 7447 hand pad.
7447 Maroon AVFN: General-purpose hand pad for cleaning and finishing. It can also be used for lacquer de-nibbing and mat finishing on solid surfaces.
7448 Grey SULFN: Ultra fine pad for light finishing on all minerals as well as lacquer de-nibbing.
7441 White Type T: Non-abrasive. For the removal of oxides and coatings, produces a scratch-free finish.

3M Roloc? Brush Products

Designed for use on portable tools and featuring the convenient Roloc twist-on, twist-off fixing system.

Clean & Finish Flap Brush R

Flaps of high performance finishing web ideal for decorative finishing and light deburring applications.

3M Scotch-Brite? Clean & Finish Rolls

A Scotch-Brite roll designed for light cleaning, finishing and deburring operations. Available in very fine grades for even finer finishes. The roll can be easily torn to convenient lengths. Available in 10M rolls in a choice of 100mm, 125 and 150mm widths.

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

3M Flap Discs 566A

Good performance at an economical price. Available in P120 for finer blending, refining and finishing work.

Applications: weld grinding, stock removal, deburring, deflashing, gate removal, edge chamfering, cleaning, blending, finishing.
Materials: all metals.
Mineral: alumina zirconia.
Backing: X-weight cotton cloth on reinforced glass fibre resin.
Coating: closed.
Bond: resin.

Flat Flap Discs

Size: 125mm.
P40, P60, P80 and P120 grit.