Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W174. Grade: RA60. Diameter: 10mm. Length: 6mm. Max. rpm: 60,000. Weight per 10: 30g.

Kennedy® Flexible Backing Pads For "Self-Stick" Sanding Discs

Designed for use with orbital sanders.
3 types available: 125mm disc (5 holes) and 150mm disc (no hole and 6 hole versions).
Thread size: 5/16" UNF.

Kennedy® Pressure Gauges

Fitted with a 1/8" BSP brass thread, can be used to measure psi & bar readings and can be fitted directly onto any filter Regulator - Lubricators. Available in two diameter sizes (40mm & 50mm), made from tough ABS plastic. Back entry fittings.

Kennedy® Router Cutters

For producing cabinet panelled door. The cutters are rearranged on the arbor to cut the profile or the scribe joint to suit.

Counter-Profile Cutter Set

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Flame Shape

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Linisher Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



50mm (2") Wide x 1520mm (60") Long.

Industrial Steel Wool

100% oil free - leaves no stains on wood or other porous surfaces. Versatile - available in a choice of seven grades for industrial, household, garden and trade use. For woodwork and preparation of polished surfaces between coats use the wire wool dry. For removing paint spots - use with a white spirit, turpentine or liquid paint remover. Always wear gloves. For household work - use with soap and water as required. Suitable for use with metallic pots and pans. 450gm (1lb) per pack.

Kennedy® Flexible Backing Pads For "Self-Stick" Sanding Discs

Designed for use with orbital sanders.
3 types available: 125mm disc (5 holes) and 150mm disc (no hole and 6 hole versions).
Thread size: 5/16" UNF.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Pointed Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.