Kennedy® 4-Way Trailing Sockets

Without cable and plug.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Flexible Backing Pads For 'Velcro' Sanding Discs

Suitable for use with Kennedy® 'Velcro-backed' sanding discs.

Kennedy® Spider Ball 4-Way 110V 16A Splitter Box

A 4-way splitter box that is water-resistant self stabilizing housing. 4 x 16amp Defender Panel Socket Outlets with LED power on indicators. 3m of 2.5mm 3G low temperature PVC cable. Internally wired using 2.5mm cable. 2.5mm internal cable from 4 x 16amp outlets - safer than using 1.5mm cable - heat issues! Improved strain relief - secure input cable. Fitted with Defender 16amp plug. Plastic housing - improved electrical safety. Made using impact resistant materials. Water resistant to IP44 - lowest point sockets. Sealed casing (IP44) - better than old steel splitter. Weighted, self-righting base - will not tip when pulled. Low centre of gravity. Integral handle - protected from damage. Cable winds round centre when not in use. Rubber cable strap - secures cable when not in use. Stackable - minimum space required when not in use.

Kennedy® Buffing & Polishing Foams

Excellent results with all leading makes of compound and polish. Very firm material, ideal for all modern paints including LVHM.

White Compounding Foam Buffing Pads

Kennedy® Fibre Discs

Resin fibre, aluminium oxide sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure Kennedy sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

100mm Diameter x 16mm Bore (Max 12,400rpm)

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Inverted Cone

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Fibre Discs

Resin fibre, aluminium oxide sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure Kennedy sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

127mm Diameter x 22mm Bore (Max 10,000rpm)

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Rolls

Roll size: (W)50mm x (L)50 Metres. Available in several grades.