Kennedy® Wire Wheels & Brushes

For hard to reach areas such as drilled holes, recesses and corners. For removal of burrs, rust and paint. 30 SWG.
Brush manufactured from Steel wire and holder and shank manufactured from galvanized steel.

Flat End Decarbonising Brushes

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kennedy® Wire Wheels & Brushes

For use in high speed air and electrical tools. Ideal for hard to reach areas. For the removal of paint, carbon and for de-burring. 6mm Shanks. 30 SWG
Brush manufactured from Steel wire and holder and shank manufactured from galvanized steel.

Pointed End Decarbonising Brushes

Kennedy® Pin Spanners for Angle Grinders

Several types available. Weight 110g.

Pin Spanner

Open-ended 14 x 17mm.

Kennedy® Router Cutters

For cutting grooves/apertures and general shaping work. Single flute for maximum support behind the cutting edge, giving strength, while providing large clearance for ease of chip flow promoting fast free cutting.

Single Flute Straight Plunging Bits

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Buffing & Polishing Foams

Softer, all purpose foam for polishing and compounding of cellulose and acrylic. With a medium density grade.

Blue Regular Compounding Foam Buffing Pads

Kennedy® Router Cutters

Flat Bottom.

Two Flute Classical Plunging Bits

Kennedy® Power Tool Chisels

Suitable for air and electric hammers and breakers, for all classes of work.

Makita Style Chisels

For Makita: HM0810, HR3500, HR3520, 8035NB. 17mm Hex Shank with Round Tang & Round Retainer Recess.

Kennedy® Router Cutters

For panel and edge moulding work, such as table tops and window boards. For use with template guide. 1/4" shank diameter.

2 Flute Rounding Over Bits