Kennedy® Router Cutters

With ball bearing guide. For edge mould on coving, picture frames, etc. Self guiding with ball bearing.

Two Flute Cove Bits

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Circular Brushes - Plain Bore

Suitable for removal of rust, paint and dirt from heavily covered parts. Side plates supplied separately.

Kennedy® Velcro-Backed Sanding Discs

No spanners required to change discs. 100% of sanding disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied again and again. Unaffected by dust or moisture. Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

Plain (No Holes)

Diameter: 125mm.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Cup Brushes Twisted Knot - Threaded Bore

For fast and heavy duty cleaning. The support ring prevents excessive spreading. For removal of rust, paint and scale on large surfaces. 50 SWG

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 41 Flat Reinforced Cutting

For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.
Grade A24 - For general purpose cutting on metals.
Grade C24 - For general purpose cutting on stone.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Rolls

Roll size: (W)38mm x (L)50 Metres. Available in several grades.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A23. Grade: RA60. Diameter: 19mm. Length: 25mm. Max. rpm: 39,000. Weight per 10: 220g.

Kennedy® TQ3 Rhino 1,400W Infrared Heater

The TQ3 Rhino with its highly efficient twin 1400W infrared elements using high frequency heat waves that penetrate the air without heating it the TQ3 warms objects and people rather than the atmosphere. This results in lower running costs because heat is not lost through drafts or pre-heating. Constructed from a high-grade and heat resistant material, so it withstands up the rigours of site use with ease. Rubber, non-marking wheels make it totally portable so it"s ideal for moving between various locations.

Available in 115V and 240V options the Rhino TQ3 offers incredible versatility as standard with useful features such as integrated lifting handle, cable tidy and anti-tilt safety cut-off switch.

The unrivalled versatility of the TQ3 means that it can be used in a multitude of environments including factories, laboratories and on-site!