Kennedy® Linisher Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



100mm (4") Wide x 915mm (36") Long.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B101. Grade: RA100. Diameter: 16mm. Length: 18mm. Max. rpm: 33,000. Weight per 10: 70g.

Kennedy® Velcro-Backed Sanding Discs

No spanners required to change discs. 100% of sanding disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied again and again. Unaffected by dust or moisture. Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

Hole Pattern: 600A. 6 Hole

Diameter: 150mm. (To suit PEX 15, GEX 150, Flex) dust extraction type.

Kennedy® 3 Pin Quick Connect Plugs

70% faster to assemble than screw terminal plugs. Fully dust and weatherproof, safe in most environments. Easy release & turn housing for fast connection. Unique screwless terminals offer fast, tool free operation. Just push down the contact slide to connect wire to terminal. Cord grip operates automatically when housing is assembled. Self cleaning corrosion resistant nickel contacts. Corrosion-free spring. Increased copper contact guarantees better conductivity and lower temperature rise. IP44 rating. Complies with BS4343 and IEC309.

Kennedy® Huntington Type Wheel Dressers

With improved quick release cutter wheel design which reduces down-time when changing wheels. Ergonomically designed cast iron handle and case hardened, polished cutters. Suitable for cleaning, sharpening and truing grinding wheels.

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

?U? Type Suitable for Black & Decker and Hitachi DIY. HSS - Medium Duty (Pack 5)

Capacity: Wood - 20.0mm, Plastics - 20.0mm. Tooth pitch: 2.5. Effective length: 60mm. For cutting curves. Wavy set teeth. Equivalent to B&D A5033.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W220. Grade: RA46. Diameter: 25mm. Length: 25mm. Max. rpm: 25,000. Weight per 10: 100g.

Kennedy® M2 Multi-Tooth Milling Cutters

For use with all multi-tooth milling cutters with 6mm bore. Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter. Suitable for "blind" or "through" pilot holes, pin will retract into cutter adaptor on "bottoming".

Pilot Pins

Bore diameter: 20mm.
Overall length: 156mm.

Kennedy® Router Cutters

With ball bearing guide. For mounting slotting. Complete with ball bearing guide which also ensures a constant depth of slot.

RS Classical Bits