York? Polishing Mop Kits

York abrasives polishing kits contain the highest quality cool running pleated calico or sisal mops and polishing compositions to allow you to achieve the best results possible, on the material being polished. Each kit is supplied with step by step instructions and a unique non-loosening reverse wound arbor to allow use with drills, die grinders or bench grinders.

Ferrous Metal Polishing Kit

Contains:
1x Arbor 6mm shank.
1x Sisal mop 4" x 1" with 3/8" bore.
1x Hard calico mop 4" x 1" with 3/8" bore.
1x Soft calico mop 4" x 1" with 3/8" bore.
1x 60gsm fast cutting composition - brown bar.
1x 60gsm general polishing composition - pink bar.
1x 60gsm mirror finish polishing composition - blue bar.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 14

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

115mm Dia x 22mm Bore 13,300 MOS (rpm).

York? Resin Fibre Backed Sanding Discs

Aluminium Oxide general-purpose grade resin fibre backed, sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure York sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

178mm Diameter x 22mm Bore (Max 7,000rpm)

York? Nylon Finishing Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Finishing Wheel 76 x 25mm

Ideal for: Matching/blending a finish, light deburring, decorative/cosmetic applications.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

40mm Dia x 25mm Height 15,300 MOS (rpm)

York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)15mm x (W)10mm.

York? Drum Holders

Suitable for use with chucks/collets on all portable power and air tools. For use with spiral bound abrasive sanding bands. Self expanding when in use for a secure grip on the band. All shanks are 6mm except where marked * which has an 8mm shank.

York? Linisher Belts

York sanding belts to suit a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



150mm (6") Wide x 1090mm (43") Long.

York? Diamond Coated Burrs

3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.

Cylindrical