Oxford Precision™ External Micrometers

With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25-50mm/1-2" and over supplied with setting standard. All supplied in a high quality fitted metal case. Manufactured to BS 870.

Metric

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Test Blocks

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Test Blocks

Oxford Precision? Angle Plates

Manufactured from close grained cast iron. BS : 5535 Grade B.

Webbed End

Webbed slotted angle plates can be used for rapid mounting fixtures for machine set-up, layout, or inspection.
They are heavily ribbed for strength and rigidity.
Sides and ends are machine finished.

Oxford Precision™ Dial Indicating Bore Gauges

Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A datum point' can be set by using a setting ring of a known diameter or a micrometer. Zero' the gauge to this datum point by rotating the bezel to align zero' with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by 'rocking' the gauge back and forth until the smallest diameter is found. All models have interchangeable anvils to cover a range of bore sizes.

Oxford Precision™ Dial Indicating Bore Gauges

Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A datum point' can be set by using a setting ring of a known diameter or a micrometer. Zero' the gauge to this datum point by rotating the bezel to align zero' with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by 'rocking' the gauge back and forth until the smallest diameter is found. All models have interchangeable anvils to cover a range of bore sizes.

Oxford™ Precision ABS Digital Caliper

The Oxford™ Precision ABSolute digital calipers have a thumbwheel for precise movement and a useful locking screw for checking repeat measurements. They have a fast response speed and large LCD display which has a dual readout, changing from mm to inch at the touch of a button. With four measuring options: Internal, External, Depth and Step. A measurement can be converted between Imperial/metric at the touch of a button. Zero can be reset at any point.

ABSolute Measurement Function.
The zero point once set is fixed until changed, even if the caliper is turned off (unless the battery is removed). Incremental mode can be achieved for repeated use of Go/No-Go measurement.

300mm(12'') ABS Digital Caliper

SPECIFICATIONS
Resolution 0.0005?/0.01mm
Instrumental Error 0.0015?/0.04mm
Repeatability 0.0005?/0.01mm
Power Supply 1 x SR44 (EDI-904-4000K)
Battery Life 1 - 2 years depending on usage
Operational Temperature 0C to 40C
Storage Temperature ?10C to 60C

Oxford Apprentice Engineers' Tool Set

Contents:
150mm (6") engineers rule.
0-25 and 25-50mm micrometers.
25mm setting standard.
10x magnification eye loupe.
150 (6") digital caliper.
0.5-1.0mm 20 blade feeler gauge set.
51 metric 60 screw pitch gauge.
Pocket scriber.
Technical data handbook.

Oxford? Precision Wire Micrometer

Specially designed for measuring wire diameters 0-10mm. The front of the body is flat to help support the wire when measuring. With knurled thimble, ratchet stop and vernier scale barrier, all over satin chrome finish.

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Large Flat Anvil