Oxford Precision? Workshop Vee Blocks & Clamp

Designed for checking precision machine parts. Hardened and precision ground steel supplied in matched pairs each with V-grooves central and parallel to the sides and base ensuring perfect alignment. Complete set with two V-blocks (one pair) and two clamps.

Box Angle Surface Plates

Box angles are work holding fixtures for precision machining large work pieces on planer or boring mill operations. They can be used singly or in combination.Manufactured from close grained cast iron with a Grade 2 ground finish. Tee slots are machined from the solid block. Manufactured to BS 5535 Grade B

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.



Supplied in Pairs

Oxford Precision? Electronic Tally Counter - Up

Electronic tally counter counts
up to 9999. Four-digit LCD
with large push-buttons.
High-impact construction with
comfortable rubber keys.
Optional audible counting
indicator.
Battery included.
WxDxH: 30x15x60mm.

Oxford? Microscopes

Features:
10x eyepiece, 2x, 4x objective lenses.
High quality prism.
Fully coated optical system
Objective lenses are of DIN standard and click into position.
Rubber eyecups and a diopter adjustment ring.
Rack and pinion focusing with built in slip clutch system.
Pillar mounted body rotates 360 and can be removed and mounted on machine tools or laboratory apparatus.
Binocular head
Above and below built in illuminator.
Black/ white and opaque object plate.
Protective Dust cover.
Benefits:
Ideal for clinical examination and teaching demonstrations in laboratories, scientific research, colleges and the medical field.
Produces a clear and well defined three dimensional image.
Magnification of up to 40x.
A choice of either upper or lower illumination or both.
Comfortable viewing.

Stereo Metallurgical Microscope

Oxford 3 Point Bore Micrometers

Designed to self-centre, for accurate measuring of bores.
Extension rods for measuring 170mm deep on 11 - 20mm and 220mm deep on 20 - 40mm.
Satin finish, fitted with knurled ratchet stop.

Oxford 3 Point Bore Micrometers

Designed to self-centre, for accurate measuring of bores.
Extension rods for measuring 170mm deep on 11 - 20mm and 220mm deep on 20 - 40mm.
Satin finish, fitted with knurled ratchet stop.

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.



Supplied in Pairs

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Large Flat Anvil

Oxford Precision™ Dial Indicating Bore Gauges

Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A datum point' can be set by using a setting ring of a known diameter or a micrometer. Zero' the gauge to this datum point by rotating the bezel to align zero' with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by 'rocking' the gauge back and forth until the smallest diameter is found. All models have interchangeable anvils to cover a range of bore sizes.