Interchangeable Anvil Micrometers

Oxfords Versatile range of micrometers with interchangeable anvils with ratchet top, lock, setting standards and wooden case. Rigid and stable cast Iron frame thats perforated for lightness.

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Test Blocks

Precision Tool Set

Multi purpose precision set supplied in fitted bench case.



Contents: 0 - 25mm and 25 - 50mm external micrometer, 25mm setting standard, 2 micrometer setting spanners, 125mm/5" vernier caliper, 150mm/6" rule with pocket clip, 300mm/12" engineers rule, 100mm engineers square, pocket scriber with clip.

Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.Manufactured to BS 870.

167 Series (Micrometer NOT included)

Mechanical Digital Micrometer

Direct reading external micrometer for quick and easy reading. With enamelled frame and tungsten carbide precision ground micro finish measuring faces. Measuring range 0-25mm. Graduation 0.01mm, 0.5mm screw pitch with lock.
Supplied in a robust case with setting key, with fitted heat shield on frame.

Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.Manufactured to BS 870.

167 Series (Micrometer NOT included)

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

V-Notch Anvil

Oxford Precision™ External Micrometers

With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25-50mm/1-2" and over supplied with setting standard. All supplied in a high quality fitted metal case. Manufactured to BS 870.

Inch

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Test Blocks

Rockwell Hardness Tester, Model 150R

For testing the Rockwell hardness of hard alloys, quenched and unquenched steels, using steel ball or diamond penetrators to measure Rockwell A, B & C units of measurement. Manufactured in accordance with BS 891 : 1962 & IS 3804 : 1966.
Technical data: Preliminary test force: 98.07N(10kgf).

Measuring Ranges:
20-88HRA (Test force: 588.4N/60kgf)
20-100HRB (Test force: 980.7N/100kgf),
20-70HRC (Test force: 1471N/150kgf).

Max Height of Test Piece:
80mm with screw protective jacket,
170mm without.

Depth of throat: 135mm.
Dimensions: 466 x 238 x 630mm
Weight: 65kg