Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.Manufactured to BS 870.

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.
Manufactured to BS 870.

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.Manufactured to BS 870.

167 Series (Micrometer NOT included)

Plain Surface Plates

Surface plates are used when a precision surface is key. These plates are manufactured from high quality of close grained cast iron and are stress relieved against distortion by heat treatment. Rigidity and long lasting accuracy are ensured by adequate top and side thickness and ribbed construction. The surfaces are free from pin holes, planed and hand scraped. Manufactured to BS 817.

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.



Supplied in Pairs

Oxford™ Precision ABS Digital Caliper

The Oxford™ Precision ABSolute digital calipers have a thumbwheel for precise movement and a useful locking screw for checking repeat measurements. They have a fast response speed and large LCD display which has a dual readout, changing from mm to inch at the touch of a button. With four measuring options: Internal, External, Depth and Step. A measurement can be converted between Imperial/metric at the touch of a button. Zero can be reset at any point.

ABSolute Measurement Function.
The zero point once set is fixed until changed, even if the caliper is turned off (unless the battery is removed). Incremental mode can be achieved for repeated use of Go/No-Go measurement.

150mm(6'') ABS Digital Caliper

SPECIFICATIONS
Resolution: 0.0005?/0.01mm
Instrumental Error: 0.001?/0.03mm
Repeatability: 0.0005?/0.01mm
Power Supply: 1 x SR44 (EDI-904-4000K)
Battery Life: 1 - 2 years depending on usage
Operational Temperature: 0C to 40C
Storage Temperature: ?10C to 60C

Oxford Weighing Scales

The Oxford range of weighing equipment provides you with a choice of capacity and accuracy to suit the majority of purposes.

WS-6E Digital Weighing Scales up to 6Kg/12lb

The Oxford WS-6E digital weighing scales are suitable for office, post room and store use. Digital display. Designed to run on mains power via the 12Vdc 650mA AC adaptor provided or the 6V4AH integral rechargeable battery, these scales will run for up to 20 hours on a single full charge.

Functions:
Zero/on/Auto-Off
Tare unit

Specification:
Capacity: 6kg /12lb
Graduation: 0.001kg/0.002lb

Oxford Precision™ Interchangeable Anvil Micrometer

Carbide tipped spindle faces. Hardened and ground anvils. Supplied in metal case with adjusting spanner. 4 anvils and 3 setting standards. Accuracy: plus/minus (4 plus L/75)mm. Measuring Faces Flatness: plus/minus 0.6mm. Parallelism: plus/minus (2 plus L/100)mm.

Oxford Precision™ External Micrometers

With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25-50mm/1-2" and over supplied with setting standard. All supplied in a high quality fitted metal case. Manufactured to BS 870.

Inch

External Micrometer Sets

With enamelled frame and tungsten carbide tipped anvils and fine adjustment ratchet. High quality fitted metal case.



Contents: 0- 1", 1"- 2"mm, 2"- 3" & 3" - 4" external micrometers, 1", 2" & 3" micrometer setting standards, 2 micrometer setting spanners.