Carecut ES1 Machining & Grinding Fluid

A biodegradable cutting fluid and has been formulated using specially selected advanced biodegradable esters. Primarily designed for heavy duty machining applications where the highest quality surface finish is required and has also been successfully used to improve productivity by increasing machine feeds. On selected applications, productivity increases have been improved by over 70% compared with traditional products without any loss of tool-life.

Features:
Chlorine-free.
Biodegradable.
Low misting.
Low smoking.
High flash point.
Pale colour.
Low odour.
Improved surface finish.
Improved tool life.

Benefits:
Environmentally friendly.
H & S/user friendly.
Improved engineering and productivity.

Castrol Multi-Purpose Grease

High performance lithium complex grease. NLGI 2 grade. Operating temperature range up to 120°C. Excellent chassis lubricant. Primarily wheel bearing grease.

Castrol High Temperature Grease

High performance lithium complex grease. NLGI 2 grade. Operating temperature range -40 to +150°C. High load carrying capacity. Good water resistance & adhesion to metal surfaces.

Techniclean MTC 43 Machine Tool Cleaner

Techniclean MTC 43 is a medium to heavy duty machine tool cleaner and steriliser, based upon powerful low foaming surfactants, emulsifiers and antimicrobiological agents.
APPLICATION
Techniclean MTC 43 has been specifically formulated to deal with a wide variety of machine tool contaminants and is easy to use with minimum disruption to production, being added direct to the coolant system whilst still in operation.
FEATURES
Compatible with common soluble coolants and metal substrates
Keeps machine tools in a clean and efficient condition
Cleans machine tool systems of a wide range of contaminants including fatty build-up in pipelines and floor ducts
Kills bacteria and fungis
Emulsifies floating tramp oil
Low foaming properties
No further corrosion protective required
Used whilst machines are operating normally
CONDITIONS OF USE
An addition of 1 - 3% of Techniclean MTC 43 is recommended. The amount added depends on the general condition of the coolant system (1% is usually adequate)
Introduce Techniclean MTC 43 where there is a good coolant movement e.g. immediately beyond the pump outflow back to the main settling tank, or direct into a velocity trench or floor
return channel. This ensures complete mixing with the coolant.
Add Techniclean MTC 43 8 - 24 hours the day before the coolant is scheduled to be discarded. The machine tools should then be operated normally for a minimum of eight hours.
Machine tools, which are not wetted by the emulsion, could be cleaned manually by using a 2 - 3% dilution of Techniclean MTC 43.
Following this period of circulation (max 24 hours), empty the entire coolant system and machines and dispose of the coolant in accordance with normal work procedures.
Rinsing with a fresh coolant (about 1%) is recommended.

Images not available for 5kg or 219kg

Castrol Hyspin Spindle Oil E5 & 10

Good thermal and oxidation properties. Both grades carry Cincinnatti Lamb (formerly Milacron) approvals. Provides excellent protection from corrosion on ferrous & yellow metal components Good anti-foaming properties. Good water tolerance and emulsification properties.

Castrol Multi-Purpose Grease

High performance lithium complex grease. NLGI 2 grade. Operating temperature range up to 120°C. Excellent chassis lubricant. Primarily wheel bearing grease.

Castrol High Speed Spindle Grease

For lubrication of extreme fast running roller/slide bearings (spindle bearings). Excellent resistance to water and metalworking emulsions. Decreased grease consumption and longer bearing life. Very high wear protection. Operates from -40 to 120°C

Castrol Magna Slideway Lubricant Oil

Based on highly refined mineral oils which incorporate tackiness & lubricity additives. Provides smooth slideway movement under heavy loads. Magna BD68 is recommended for horizontal slideways. Magna CF220 is recommended for vertical slideways. Excellent anti-wear properties

Magna BD68 & CF220

Castrol Variocut™ C486 Neat Cutting Oil

• Advanced additive technology - improved tool life, higher speeds, increased productivity.
• Chorine free - environmentally acceptable.
• Low odour - pleasant to use, high operator acceptance.

Absorbent Granules

MOP absorbent granules used to mop up oil spills on floors and other contaminated surfaces. Holds the absorbed fluid, does not disintegrate. Chemically inactive, odourless granular material.