Spill Barrow

Manufactured from 100% polyethylene. Front mounted castors for easy manoeuvring. The 60 litre front hopper is fitted with a lid and can be used for granular absorbents, salt or grit. The 100 litre rear bin is designed to take a waste bag for collecting used product. This superb product is a ?must-have? where granular absorbents are used.
L x W x H (cm): 136 x 71 x 96.5

SSB135

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Oil-only/Light Duty
Size: 50 x 40cm
Pack Qty: 200
Absorbs (ltrs): 0.65

Solent? Tough Stuff' Absorbents

Following on from the success of the Solent Plus absorbents are these all-new "ToughStuff" pads and rolls. Featuring a
unique three-layer construction, these products offer the very best of absorbent technology that is available today. Sandwiching a high loft filling of 100% polypropylene absorbent fibres there is a spun bond coverstock to the top for better wear resistance and a fine fibre coverstock to the underside for a lowlint finish that doesn't impede the speed of absorbency. Pads and rolls both utilise the same construction and are available in maintenance, oil-only or chemical grades with the same colour coding as all the other absorbents in the Solent Plus spill control range.

Chemical Roll

Pack quantity: 1.
Size: 50cm x 40m.
Absorbs: 110 litres.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

10ltr Vinyl Holdall Spill Kit

Contents:
10 x pads.
1 x sock.
1 x 1kg tub ?Drum Plug?.
2 x disposal bags.

Solent? Tough Stuff' Absorbents

Following on from the success of the Solent Plus absorbents are these all-new "ToughStuff" pads and rolls. Featuring a
unique three-layer construction, these products offer the very best of absorbent technology that is available today. Sandwiching a high loft filling of 100% polypropylene absorbent fibres there is a spun bond coverstock to the top for better wear resistance and a fine fibre coverstock to the underside for a lowlint finish that doesn't impede the speed of absorbency. Pads and rolls both utilise the same construction and are available in maintenance, oil-only or chemical grades with the same colour coding as all the other absorbents in the Solent Plus spill control range.

Maintenance Pad

Pack quantity: 20.
Size: 50 x 40cm.
Absorbs: 1.1 litres.

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Oil-only/Light Duty
Size: 50 x 40cm
Pack Qty: 50
Absorbs (ltrs): 0.65

Solent? Audit Spill Cover

Spill kit audit covers are yellow, weatherproof PVC covers with elasticated cord to allow fitting over the top of a 2-wheeled wheelie bin spill kit. A4 sized clear pouch for inserting audit record sheet. Tamperproof tape fitted on the container and cover indicates whether any of the contents have been used. Depleted spill kits are classified as ISO14001 non-conformity. Available in 3 types: 120 litres, 240 litres and 360 litres.

Solent? Absorbent Pillows

These absorbent pillows are particularly useful for coping with persistent leaks that require more than the absorbent capacity offered by pads. Can be left in place under machinery.
Dimensions: 38 x 23cm.

Drum Racker & Stacker

For safe storage and dispensing applications put one or more of these units in place. The base unit can be used on its own for two drums, or up to two levels of stackers can be used for a maximum storage of six drums. Corrosion resistant 100% polyethylene construction.

SDS-B2

L x W x H (cm): 139 x 125 x 49
Sump (ltrs): 400

Drum Racker & Stacker

For safe storage and dispensing applications put one or more of these units in place. The base unit can be used on its own for two drums, or up to two levels of stackers can be used for a maximum storage of six drums. Corrosion resistant 100% polyethylene construction.

SDS-R2

L x W x H (cm): 124 x 79.5 x 37