Solent? 'Natural' Absorbents

Rather than relying on a non-renewable resource such as polypropylene for their construction, this all-new range of absorbent pads, rolls and socks from Solent Plus utilises raw materials that are constituted 80% cellulose fibre in their manufacture. Cellulose fibres are one of the most widely available sustainable resources and have a low-dependence on fossil fuels. All of the products are available in either maintenance or oil-only grades, and represent a viable, cost-effective alternative to traditional melt-blown absorbents. The performance is equal to, if not better in some cases than conventional absorbents. Of particular note here is the oil pad, which has a class-beating absorbency rating of up to 1.4 litres per pad.

?Natural? Socks

?Maintenance? and ?Oil only? will absorb 4ltrs.

Solent? Absorbent Rolls

Many applications for absorbents can be met by making use of one or more of these rolls. Make a selection from medium weight 50cm or 90cm wide, or lightweight 50cm x 80m long. All sizes and weights are perforated for economy of use.



Chemical/Medium Duty
Size: 50cm x 40m
Absorbs (ltrs): 80

Solent? 'Natural' Absorbents

Rather than relying on a non-renewable resource such as polypropylene for their construction, this all-new range of absorbent pads, rolls and socks from Solent Plus utilises raw materials that are constituted 80% cellulose fibre in their manufacture. Cellulose fibres are one of the most widely available sustainable resources and have a low-dependence on fossil fuels. All of the products are available in either maintenance or oil-only grades, and represent a viable, cost-effective alternative to traditional melt-blown absorbents. The performance is equal to, if not better in some cases than conventional absorbents. Of particular note here is the oil pad, which has a class-beating absorbency rating of up to 1.4 litres per pad.

?Natural? Rolls

'Maintenance' will absorb 62ltrs. 'Oil only' will absorb 108ltrs.

Spill Depot

The perfect way to store and dispense absorbents. Made from quality industrial polyester powder-coated steel.

Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

SDC919P

L x W (cm): 91 x 91 Polyurethane

Polyethylene Storage Cabinets

One or more of these cabinets provide a neat and tidy solution to the storage of drums and containers of various sizes up to 205 litres. All sizes are fully weather resistant and complete with lockable doors and integral sumps.

SSC-CAB2

L x W x H (cm): 65 x 57 x 165
Sump (ltrs): 70

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Oil-only/Medium Duty
Size: 50 x 40cm
Pack Qty: 100
Absorbs (ltrs): 0.8

Solent? Absorbent Rolls

Many applications for absorbents can be met by making use of one or more of these rolls. Make a selection from medium weight 50cm or 90cm wide, or lightweight 50cm x 80m long. All sizes and weights are perforated for economy of use.



Maintenence/Medium Duty
Size: 50cm x 40m
Absorbs (ltrs): 80

Salvage Container

Where a drum is damaged or leaking UN transport regulations require that it is transported in a leak proof container. This container fully meets these regulations. The 100% polyethylene construction ensures compatibility to a broad band of chemicals and oils. The lid is fully threaded and can be tightened using a bar or piece of timber across the slots. The moulded design externally allows for lifting by a fork-lift or sling.
L x W x H (cm): 81 dia x 105
Sump (ltrs): 360

SSD-360

2-drum Spill Pallet

100% polyethylene construction is resistant to corrosion and the knocks and scrapes of the industrial environment. Fully compliant with all current regulations.
L x W x H (cm): 122 x 82 x 33
Sump (ltrs): 240

SDP-2