Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

50ltr Vinyl Holdall Spill Kit

Contents:
35 x pads.
3 x socks.
3 x pillows.
5 x disposal bags.

Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

SDC616P

L x W (cm): 61 x 61 Polyurethane

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Chemical/Light Duty
Size: 50 x 40cm
Pack Qty: 200
Absorbs (ltrs): 0.5

Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

SDC614

L x W (cm): 65 x 45 Clay
Pack Qty: 2

Spill Barrow

Manufactured from 100% polyethylene. Front mounted castors for easy manoeuvring. The 60 litre front hopper is fitted with a lid and can be used for granular absorbents, salt or grit. The 100 litre rear bin is designed to take a waste bag for collecting used product. This superb product is a ?must-have? where granular absorbents are used.
L x W x H (cm): 136 x 71 x 96.5

SSB135

Solent? Tough Stuff' Absorbents

Following on from the success of the Solent Plus absorbents are these all-new "ToughStuff" pads and rolls. Featuring a
unique three-layer construction, these products offer the very best of absorbent technology that is available today. Sandwiching a high loft filling of 100% polypropylene absorbent fibres there is a spun bond coverstock to the top for better wear resistance and a fine fibre coverstock to the underside for a lowlint finish that doesn't impede the speed of absorbency. Pads and rolls both utilise the same construction and are available in maintenance, oil-only or chemical grades with the same colour coding as all the other absorbents in the Solent Plus spill control range.

Maintenance Roll

Pack quantity: 1.
Size: 50cm x 40m.
Absorbs: 110 litres.

Polyethylene Storage Cabinets

One or more of these cabinets provide a neat and tidy solution to the storage of drums and containers of various sizes up to 205 litres. All sizes are fully weather resistant and complete with lockable doors and integral sumps.

SSC-CAB5

L x W x H (cm): 72 x 92 x 152
Sump (ltrs): 100

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Chemical/Medium Duty
Size: 50 x 40cm
Pack Qty: 100
Absorbs (ltrs): 0.8

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

25ltr Small Poly Bin Spill Kit

Contents:
17 x pads.
1 x sock.
2 x pillows.
4 x disposal bags.

Drum Racker & Stacker

For safe storage and dispensing applications put one or more of these units in place. The base unit can be used on its own for two drums, or up to two levels of stackers can be used for a maximum storage of six drums. Corrosion resistant 100% polyethylene construction.

SDS-R2

L x W x H (cm): 124 x 79.5 x 37