Decorators Caulk

EVO-STIK Decorators Caulk is a solvent free fast drying paste that sets by evaporation of water when exposed to the atmosphere. It is ideal for sealing low movement gaps around windows, doorframes, skirting boards and general sealing of internal fixtures and can be painted when set.
Size: 310ml.

Evo-Stick Foam filler

EVO-STIK foam filler is a fast curing assembly and filler foam based on a one-part polyurethane pre-polymer, which cures on contact with humidity and uses an environmentally safe propellant. Foam Filler is ideal for doorframe setting and filling of gaps between brickwork and window frames, sealing draughty gaps around pipes as well as filling gaps in roofing eaves, roof panel joints etc, where a tight draught seal is required. Adheres to the majority of common construction materials.
Size: 750ml.

Wood Adhesive (Resin W)

Used for general woodworking joinery, bonding wood veneers and laminated plastics to wood or chipboard cores. May also be used for bonding other materials to recessed wood. Can be used on all woods, is fast setting with a bond strength generally better than the wood itself. Complies with BS 4071:1996.

Impact Adhesive

Ideal for producing a strong bond on contact, without the need for jigs, clamps or weights.

528 Contact Adhesive

A general-purpose one part polychloroprene rubber/resin contact adhesive which has a high initial grab with an excellent final bond strength and a good temperature resistance. Used for bonding decorative and rigid laminated plastic sheets of PVC of ABS to wood, wood composite boards and metals. Also bonds rigid plastic nosings and covings. Can be used on suspended or vertical flat surfaces. Available in 500ml, 1, 2.5 or 5 litre tins. Also available as Thixotropic (TX), which is faster curing and of a thicker consistency.

Expanding Filler

Used for filling gaps and holes in awkward areas, such as window frames/sills, insulating and filling wall gaps. Adheres to all building materials, except polythene, teflon, silicone, oily and greasy surfaces. The cured foam is resistant to water and is also rot proof. Can be cut, sanded, plastered or painted also provides good heat and sound insulation.

WeatherProof Wood Adhesive (Resin W)

Used for general woodworking joinery, bonding wood veneers and laminated plastics to wood or chipboard cores. May also be used for bonding other materials to recessed wood. Can be used on all woods, is fast setting with a bond strength generally better than the wood itself. Complies with BS 4071:1996.

Cleaner 3 Cleaner/Thinner

Bostik Cleaner 3 is used for thinning solvent-borne adhesives based on polychloroprene rubber and, to a limited extent, nitrile rubber and polyurethane based adhesives (up to 10-15% addition). It is also used for cleaning brushes and other application equipment used with these adhesive types and as a surface cleaner prior to adhesive application.
Application Instructions;
Moisten rag or cotton wool with Bostik Cleaner 3 and wipe the contaminated surface, avoid surface recontamination by frequently changing the rag/cotton wool. Allow residual solvent to dry off before carrying out subsequent operations. Bostik Cleaner 3 is a mixture of ester, aliphatic and aromatic hydrocarbon solvents.

Evo 613 Contact Adhesive

High quality Evo-stick 613 contact adhesive with quick curing time. Long shelf life.



Polychloroprene based contact adhesive thats suitable for bonding laminate plastic sheeting to wood, metals and most types of board. Easily applied by brush or spreader. Resultant bond gives excellent strength, high sheer strength and temperature resistance.

Impact Adhesive

Ideal for producing a strong bond on contact, without the need for jigs, clamps or weights.