Sticks Like Sh*t All Weather Adhesive

Evo-Stik Sticks Like Sh*T is a high performance, single component, moisture curing, Modified Silane (MS) Polymer based. It will bond most surfaces even if both are impervious. The product will bond damp surfaces and may even be used underwater. It has very low odour, cures to form a hard elastic rubber, with almost no shrinkage and low hazard; it does not contain any water or solvent, making itideal for bonding foam polystyrene sheets. When fully cured the product may be painted with most types of paint.

528 Contact Adhesive (Thixotropic)

A general-purpose one part polychloroprene rubber/resin contact adhesive which has a high initial grab with an excellent final bond strength and a good temperature resistance. Used for bonding decorative and rigid laminated plastic sheets of PVC of ABS to wood, wood composite boards and metals. Also bonds rigid plastic nosings and covings. Can be used on suspended or vertical flat surfaces. Thixotropic (TX), which is faster curing and of a thicker consistency than standard 528 contact adhesive. Available in 1 or 5 litre tins.

Laybond Gripfill Multi-Purpose Gap Filling Adhesive

GRIPFILL is a brand leading one-part gap filling adhesive, which gives excellent adhesion and bonding strength to most solid building materials, even vertical applications. Suitable for interior and exterior use, provided the bond is covered.
Also available in Solvent Free for bonding of Polystyrene ceiling tiles, coving, foamed PVC's etc.

Impact Adhesive

Ideal for producing a strong bond on contact, without the need for jigs, clamps or weights.

Cleaner 3 Cleaner/Thinner

Bostik Cleaner 3 is used for thinning solvent-borne adhesives based on polychloroprene rubber and, to a limited extent, nitrile rubber and polyurethane based adhesives (up to 10-15% addition). It is also used for cleaning brushes and other application equipment used with these adhesive types and as a surface cleaner prior to adhesive application.
Application Instructions;
Moisten rag or cotton wool with Bostik Cleaner 3 and wipe the contaminated surface, avoid surface recontamination by frequently changing the rag/cotton wool. Allow residual solvent to dry off before carrying out subsequent operations. Bostik Cleaner 3 is a mixture of ester, aliphatic and aromatic hydrocarbon solvents.

Laybond Gripfill Multi-Purpose Gap Filling Adhesive

GRIPFILL is a brand leading one-part gap filling adhesive, which gives excellent adhesion and bonding strength to most solid building materials, even vertical applications. Suitable for interior and exterior use, provided the bond is covered.
Also available in Solvent Free for bonding of Polystyrene ceiling tiles, coving, foamed PVC's etc.

Evo-Bond PVA

Evo-Bond will bond most building materials provided that one has a degree of porosity. Suitable for a variety of applications including bonding, priming and as admixtures. Evo-Bond may also be used as a dust sealer. Excellent primer, bonds to most building surfaces and improves adhesion.

Timebond Adhesive

Evo-Stik Timebond is a general-purpose, thixotropic, non-drip contact adhesive, which is clean, and easy to apply, being non-drip it is ideal for use on vertical as well as horizontal surfaces. The resultant bonds give excellent bond strength and good temperature resistance.

Evo 613 Contact Adhesive

High quality Evo-stick 613 contact adhesive with quick curing time. Long shelf life.



Polychloroprene based contact adhesive thats suitable for bonding laminate plastic sheeting to wood, metals and most types of board. Easily applied by brush or spreader. Resultant bond gives excellent strength, high sheer strength and temperature resistance.

528 Contact Adhesive (Thixotropic)

A general-purpose one part polychloroprene rubber/resin contact adhesive which has a high initial grab with an excellent final bond strength and a good temperature resistance. Used for bonding decorative and rigid laminated plastic sheets of PVC of ABS to wood, wood composite boards and metals. Also bonds rigid plastic nosings and covings. Can be used on suspended or vertical flat surfaces. Thixotropic (TX), which is faster curing and of a thicker consistency than standard 528 contact adhesive. Available in 1 or 5 litre tins.