Expanding Filler

Used for filling gaps and holes in awkward areas, such as window frames/sills, insulating and filling wall gaps. Adheres to all building materials, except polythene, teflon, silicone, oily and greasy surfaces. The cured foam is resistant to water and is also rot proof. Can be cut, sanded, plastered or painted also provides good heat and sound insulation.

Timebond Adhesive

Evo-Stik Timebond is a general-purpose, thixotropic, non-drip contact adhesive, which is clean, and easy to apply, being non-drip it is ideal for use on vertical as well as horizontal surfaces. The resultant bonds give excellent bond strength and good temperature resistance.

Sticks Like Sh*t All Weather Adhesive

Evo-Stik Sticks Like Sh*T is a high performance, single component, moisture curing, Modified Silane (MS) Polymer based. It will bond most surfaces even if both are impervious. The product will bond damp surfaces and may even be used underwater. It has very low odour, cures to form a hard elastic rubber, with almost no shrinkage and low hazard; it does not contain any water or solvent, making itideal for bonding foam polystyrene sheets. When fully cured the product may be painted with most types of paint.

Evo-Stick Foam filler

EVO-STIK foam filler is a fast curing assembly and filler foam based on a one-part polyurethane pre-polymer, which cures on contact with humidity and uses an environmentally safe propellant. Foam Filler is ideal for doorframe setting and filling of gaps between brickwork and window frames, sealing draughty gaps around pipes as well as filling gaps in roofing eaves, roof panel joints etc, where a tight draught seal is required. Adheres to the majority of common construction materials.
Size: 750ml.

Laybond Gripfill Multi-Purpose Gap Filling Adhesive

GRIPFILL is a brand leading one-part gap filling adhesive, which gives excellent adhesion and bonding strength to most solid building materials, even vertical applications. Suitable for interior and exterior use, provided the bond is covered.
Also available in Solvent Free for bonding of Polystyrene ceiling tiles, coving, foamed PVC's etc.

Wood Adhesive (Resin W)

Used for general woodworking joinery, bonding wood veneers and laminated plastics to wood or chipboard cores. May also be used for bonding other materials to recessed wood. Can be used on all woods, is fast setting with a bond strength generally better than the wood itself. Complies with BS 4071:1996.

Wood Adhesive (Resin W)

Used for general woodworking joinery, bonding wood veneers and laminated plastics to wood or chipboard cores. May also be used for bonding other materials to recessed wood. Can be used on all woods, is fast setting with a bond strength generally better than the wood itself. Complies with BS 4071:1996.

Impact Adhesive

Ideal for producing a strong bond on contact, without the need for jigs, clamps or weights.

Evo-Bond PVA

Evo-Bond will bond most building materials provided that one has a degree of porosity. Suitable for a variety of applications including bonding, priming and as admixtures. Evo-Bond may also be used as a dust sealer. Excellent primer, bonds to most building surfaces and improves adhesion.

Evo 613 Contact Adhesive

High quality Evo-stick 613 contact adhesive with quick curing time. Long shelf life.



Polychloroprene based contact adhesive thats suitable for bonding laminate plastic sheeting to wood, metals and most types of board. Easily applied by brush or spreader. Resultant bond gives excellent strength, high sheer strength and temperature resistance.