Castrol Hyspin Hydraulic Fluids

High quality, premium hydraulic fluid. Provides excellent anti-wear and thermal stability performance. Latest low zinc additive technology. Provides excellent protection from corrosion on ferrous and yellow metal components. Good anti-foaming properties. Good water tolerance and demulsification
properties.

Castrol Metal Cutting Lubricants

A fully synthetic soluble cutting fluid, intended for grinding ferrous metals. Has excellent health and safety characteristics, containing no mineral oil, phenols or sodium nitrite. Combines outstanding grinding characteristics with good operator acceptability and wide application in general machining. In general grinding operations, it permits a high surface finish to be achieved while ensuring long wheel life. It has good anti-corrosion properties in soft and hard waters and is compatible with all metals.

Syntilo™ 22 Fully Synthetic Soluble Cutting Fluid - 20ltr

Carecut ES1 Machining & Grinding Fluid

A biodegradable cutting fluid and has been formulated using specially selected advanced biodegradable esters. Primarily designed for heavy duty machining applications where the highest quality surface finish is required and has also been successfully used to improve productivity by increasing machine feeds. On selected applications, productivity increases have been improved by over 70% compared with traditional products without any loss of tool-life.

Features:
Chlorine-free.
Biodegradable.
Low misting.
Low smoking.
High flash point.
Pale colour.
Low odour.
Improved surface finish.
Improved tool life.

Benefits:
Environmentally friendly.
H & S/user friendly.
Improved engineering and productivity.

Castrol Spheerol L-EP Greases

Lithium-based general-purpose extreme pressure greases, based upon mineral oils and incorporating extreme pressure agents to protect bearing components subject to heavy and shock loadings. Available in a range of consistencies to suit most applications, from an NLGI 2 for general-purpose bearing lubrication to an NLGI 00 semi-fluid grease suitable for centralised lubrication systems and grease filled gearboxes. Being lithium-based, Spheerol EPL greases have good water tolerance, are resistant to water washing and incorporate powerful rust inhibitors to protect bearing components against corrosion.

Features:
Excellent stability gives long service life.
Wide operating temperature range of -20C to 120C.
Good adhesion and water-wash resistance.
Range of consistencies to suit most applications.

Chain Lubricant

Thermally stable synthetic chain lubricant with exceptional adhesion, penetration & load bearing capacity.
Temperature limits: -45°C to 250°C. Odourless non-toxic silicon-free. Is not washed by water. Can be used in a wide range of hostile environments.

Viscogen KL 23

Q8 Cutting Oils

High performance neat cutting oil providing excellent tool life and surface finish. For multiple machining applications: milling, drilling, thread grinding, broaching, gear hobbing, etc. Multi-metal applications: ferrous and non-ferrous metals. Non-staining on non-ferrous metals. A clear, pale yellow straight cutting fluid manufactured from solvent refined mineral oil and blended with fatty oil and chlorinated additives. Ensures good tool life and cutting performance. A wide range of duties may be performed using this oil, for apart from its application to automatic and multi-tool lathes handling the higher tensile steels, Ilocut 486 is suitable for such specialised operations as production thread grinding, broaching and multi-cutter milling set-ups. Castrol Ilocut 486 is suitable for both ferrous and non-ferrous materials, high tensile steels, Inconel, high nickel and stainless steel. Castrol Ilocut 486 is suitable for general use on automatic and multi-tool lathes, production thread grinding, broaching, multi-cutter milling and gear hobbing (Gleason Revacycle). Guard against water entry.

Features:
Chlorinated and fatty additives.
High performance product.
Non staining to non ferrous alloys.
Versatile product.

Benefits:
Protects against premature dulling and a smooth chip take-off is assured.
Excellent rationalisation grade.
Promotes prolonged tool life and improved surface finish.

Ilocut 486 Neat Cutting Oil

Techniclean MTC 43 Machine Tool Cleaner

Techniclean MTC 43 is a medium to heavy duty machine tool cleaner and steriliser, based upon powerful low foaming surfactants, emulsifiers and antimicrobiological agents.
APPLICATION
Techniclean MTC 43 has been specifically formulated to deal with a wide variety of machine tool contaminants and is easy to use with minimum disruption to production, being added direct to the coolant system whilst still in operation.
FEATURES
Compatible with common soluble coolants and metal substrates
Keeps machine tools in a clean and efficient condition
Cleans machine tool systems of a wide range of contaminants including fatty build-up in pipelines and floor ducts
Kills bacteria and fungis
Emulsifies floating tramp oil
Low foaming properties
No further corrosion protective required
Used whilst machines are operating normally
CONDITIONS OF USE
An addition of 1 - 3% of Techniclean MTC 43 is recommended. The amount added depends on the general condition of the coolant system (1% is usually adequate)
Introduce Techniclean MTC 43 where there is a good coolant movement e.g. immediately beyond the pump outflow back to the main settling tank, or direct into a velocity trench or floor
return channel. This ensures complete mixing with the coolant.
Add Techniclean MTC 43 8 - 24 hours the day before the coolant is scheduled to be discarded. The machine tools should then be operated normally for a minimum of eight hours.
Machine tools, which are not wetted by the emulsion, could be cleaned manually by using a 2 - 3% dilution of Techniclean MTC 43.
Following this period of circulation (max 24 hours), empty the entire coolant system and machines and dispose of the coolant in accordance with normal work procedures.
Rinsing with a fresh coolant (about 1%) is recommended.

Images not available for 5kg or 219kg

Q8 Cutting Oils

High performance neat cutting oil providing excellent tool life and surface finish. For multiple machining applications: milling, drilling, thread grinding, broaching, gear hobbing, etc. Multi-metal applications: ferrous and non-ferrous metals. Non-staining on non-ferrous metals. A clear, pale yellow straight cutting fluid manufactured from solvent refined mineral oil and blended with fatty oil and chlorinated additives. Ensures good tool life and cutting performance. A wide range of duties may be performed using this oil, for apart from its application to automatic and multi-tool lathes handling the higher tensile steels, Ilocut 486 is suitable for such specialised operations as production thread grinding, broaching and multi-cutter milling set-ups. Castrol Ilocut 486 is suitable for both ferrous and non-ferrous materials, high tensile steels, Inconel, high nickel and stainless steel. Castrol Ilocut 486 is suitable for general use on automatic and multi-tool lathes, production thread grinding, broaching, multi-cutter milling and gear hobbing (Gleason Revacycle). Guard against water entry.

Features:
Chlorinated and fatty additives.
High performance product.
Non staining to non ferrous alloys.
Versatile product.

Benefits:
Protects against premature dulling and a smooth chip take-off is assured.
Excellent rationalisation grade.
Promotes prolonged tool life and improved surface finish.

Ilocut 486 Neat Cutting Oil

Castrol High Speed Spindle Grease

For lubrication of extreme fast running roller/slide bearings (spindle bearings). Excellent resistance to water and metalworking emulsions. Decreased grease consumption and longer bearing life. Very high wear protection. Operates from -40 to 120°C

Castrol Lubricants and Cutting Fluids

Castrol CareCut ES2 is formulated using advanced biodegradable ester based technology it can be used with all types of grinding media, but is especially effective with CBN grinding. It is suitable for severe grinding, form grinding and gear grinding. It is suitable for all ferrous and non-ferrous metal machining but is particular suitable for boring operations in general deep hole drilling, boring and trepanning where pressurised coolant systems are used to clear swarf quickly.

Features:
Very high lubricity.
Biodegradable.
Chlorine-free.
Pale colour and low odour.
Low misting.
High flash point.

Benefits:
Improved tool life, surface finish and productivity (increased G ratio).
Environmentally friendly.
Pleasant to use.
Improved health and safety.

CareCut ES2 Cutting and Grinding Lubricant