Hitachi Angle Grinders

Excellent overload durability.
Max power output 3100W.
Optional Depressed Center Wheel


Hitachi G23SS 230mm (9") Angle Grinder Specification:
Max power output 3500W and wear resistance of motor.
Disc diameter: 230mm (9").
Hole dia: 22mm (7/8")
Spindle Thread: M14 x2.
Power Input: 1900W.
No load speed: 6,600/min.
Overall length: 463mm (18-7/32").
Weight: 4.3kg (9.5lbs).
Standard accessories: side handle, wrench.

G23SS 230mm (9") Angle Grinder

Indoor Use

With the introduction of a new EEC Directive, safety in the work place is paramount. Fitting one of Vulcascot’s cable protect or systems is not just good sense, it is a priority for caring employers who consider staff well-being. UV stabilised for extended life. Produced from a fire retardant compound conforming to BS476 Part 7 Class 3, and its European equivalent DIN 4102 Part 1 and Class B1.

Colour: black
(not illustrated).
9.0m coil length.

115mm x 50m AL/Ox Paper Roll P180

Available in a choice of Medium or Heavy Duty and in several grades. Roll size : 115mm x 50m.

Medium

Open coat aluminium oxide paper for wood, metal, fibreglass, paint, filler and lacquer.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Sharpening Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

3 Square Aluminium Oxide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

York? Abrasives Pre-Finish & Polishing Compounds

York? Abrasives have a compound bar for every polishing job! They are manufactured using the finest quality ingredients to ensure that you get the highest quality results every time on all metals, plastics and glass. They are excellent high performance polishing compounds, not too waxy and not too dry.

For the full range of York? Abrasives polishing mops and compounds please refer to our catalogue.

Bright Shine Pre-Finish Polishing Compound Bar

This bar has a composition that gives good cutting characteristics and also leaves a bright finish when used with our sisal mops. Dimensions: 43x218x55mm (HxWxD). Average weight: 800g.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W154. Grade: RA120. Diameter: 5mm. Length: 13mm. Max. rpm: 70,000. Weight per 10: 30g.

Reversible Pistol Grip Drill

B2842
Use for drilling and screwdriving. Two speed trigger (slow speed when pushed halfway). Directional lever accessible from both sides for left/right handed use. 13mm (1/2?) chuck and detachable side handle included. Planetary gears for longer life and smoother running. Ergonomic comfortable grip.

Specifications:
Chuck size: 1/2? (13mm). Free speed: 800rpm. Recommended air pressure: 6.2Bar (90PSI). Air consumption: 4CFM* (113l/min).
Air inlet thread: 1/4? NPT. Spindle thread: 3/8? - 24. Minimum air hose size (ID): 3/8? (10mm). Noise level?: 86dBA.
Sound power level?: 93dBA. Vibration level #: 0.4m/s2. Overall length: 218mm. Net weight: 1.3kg.
? Per EN ISO 15744:2002.
# Per EN 28927-5.

Action shots:
Ergonomic comfortable grip.
Two speed trigger for slow or fast action.
Forward/Reverse lever action.
Complete with industrial chuck.

Reversible pistol grip drill 13mm (1/2?) - 800RPM

Makita 10mm 90 Angle Rotary Drills

Reversible, double insulated and variable speed trigger.
66mm head height.
Capacities: max. in steel: 10mm, max. in wood: 25mm.
No load speed: 0 - 2,400rpm.
Input wattage: 450W.
Accessories: chuck key, side handle and built-in job light.
Net Weight 1.4kg.

Available in 240V and 110V, in a choice of key and keyless chucks.

DA3010F/DA3011F