115mm (6") Angle Grinder

Compact size with paddle switch for easy operation right or left handed. Lightweight to reduce operator fatigue. Spindle lock for easy accessory changes.
Power input: 720W.
No load speed: 11,000rpm.
Spindle thread: M14 x 2mm.
Disc bore size: 22mm.
Weight: 1.80kg.
Accessories: Wheel guard and side handle.

GA4534

355mm (14") Abrasive Cut-Off Saw

Shaft lock. Double action safety switch. Quick release vice. Double insulated. Accessories include: Cut-off wheel, socket wrench, wheel arbor, inner flange, outer flange bolt and washer.

2414NB

Max. Cutting Capacity: 115mm. No Load Speed: 3,800rpm. Wheel Diameter: 355mm. Hole Diameter: 25.4mm. Power Input: 1,650W. Net Weight: 16.3kg.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 27 General Purpose Metal A30R Grinding

For steel/stainless steel. Fast material removal. General-purpose applications. Free of iron, sulphur and chlorine. Made of corundum. Box quantity 10.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

100mm Dia x 16mm Bore 15,300 MOS (rpm).

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 600A. 6 Hole.

Diameter: 150mm.

SIA Fibre Discs

4819
Tough durable Zirconia grain with grinding aid to reduce heat build up and glazing. Strong fibre backing to give maximum grain support on arduous applications. Excellent life and cut to reduce down time and consumable costs, ideal for mild and stainless steel applications. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 180mm.

100mm Diameter x 16mm Bore (Max 12,000rpm)

Ajax Machine Tools

Ajax vertical bandsaws are suitable for for cutting steels, alloys, plastics, wood and resins, the machines are a fabricated steel design ensuring rigidity and guaranteeing maximum working life.

The machine features variable blade speed and is fitted with a blade shear, welder, grinder and annealing unit, giving the facility of cutting internal shapes, by breaking the blade passing through component, welding grinding and annealing prior to cutting.
Fully CE marked.

Standard features
Emergency stop switch.
Variable speed with display.
Welder, grinder, annealing and shear.
Worklight.
Rip fence and mitre protractor.

Vertical Bandsaws

Model Number: AJVB1000
Voltage: 400v/3ph 50Hz
Throat Depth: 1000mm
Working Height: 300mm
Blade Length: 4540mm
Height: 2065mm
Blade speed: 20-500m/min.
Blade width: 16mm (5/8??).
Motor rating: 2hp.
Table size: 600x500mm.
Table tilt: 15x4 ways.
Weight: 800kg

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Evolution Saw Blades

Evolution Diamond blades are manufactured to a high specification.
Hardened blade body ensures the blade runs truer for longer.
High concentration of diamond for longevity.

Available in two rim styles hot pressed turbo segmented rim for consistent cutting ability and continuous rim for delicate tile cutting and a clean finish.

Rage2 355mm (14") Diamond Blade

Rage2 blade specifications:
Diameter: 355mm (14")
Bore: 25.4mm
Kerf (Thickness): 2.4mm (3/32")
Rim Style: Segmented
Max Speed: 4400RPM

3M Abrasive Utility Cloths and Sheets

314D
Aluminum oxide abrasive product rolls and sheets constructed on a J weight, durable cloth backing. For use in metalworking.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.