York? Diamond Coated Burrs

3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.

Ball Nosed

Karcher Domestic Vacuum

The WD2.200 wet and dry vacuum form Karcher is a powerful 1400W compact all-purpose domestic vacuum cleaner, capable of picking up either wet or dry debris. It can be used with or without a bag and also features a high capacity cartridge filter and has a 17 Litre capacity. Ideal for use around the home or in your car or workshop.

Practical holders on the vacuum keep the standard accessories securely stowed and ready for use.

WD2.200 DOMESTIC Wet and Dry Vacuum Cleaner

WD2.200 Specification:
Power: 1400W, 240V.
Capacity: 17 litre tank.
Air flow rate 68 l /s.
Vacuum: 200mbar.
Power cable: 4m length.
Weight: 7Kg

Standard accessories:
Cartridge filter.
Crevice tool.
Filter bag paper.
Suction hose 1.9m.
Suction tubes 2x 0.5m.
Wet and dry nozzle clip.

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Rolls

Roll size: (W)25mm x (L)50 Metres. Available in several grades.

York? Nylon Finishing Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Finishing Wheel 76 x 50mm

Ideal for: Matching/blending a finish, light deburring, decorative/cosmetic applications.

York? Depressed Centre Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable grinders/cut-off machines. Not to be used for ?free hand? cutting and importantly not to be used for grinding.

Depressed Centre Cutting Discs - Type 42

Grade A30/A24. For general-purpose use on metals.

Trend Router Cutters

To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Two Flute Rounding Over Bits

York? Linisher Belts

York sanding belts to suit a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



150mm (6") Wide x 1090mm (43") Long.

York? Flat Reinforced Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.

Type 41

Grade A30/A24. For general-purpose use on metals.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B104. Grade: RA100. Diameter: 8mm. Length: 10mm. Max. rpm: 68,000. Weight per 10: 20g.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

115mm Dia x 22mm Bore 13,300 MOS (rpm).