3M EXL Unitised Discs Roloc? XL-UR

All products feature a unique twist on/twist off fixing system. Grade, size or product can be changed quickly and easily. Discs have no centre nut allowing all of the disc surface to be used, reducing production costs. Suitable for use with all types of portable drills, grinders, etc. Can be used "on-face" as a disc or "on-edge" as a wheel.

Ingersoll-Rand Air Impact Wrench 1/2" Square Drive

2130XP
Lightweight reinforced aluminum hammer case; ergonomic composite housing textured handle design for improved comfort and control. Multi-position power management control switch. Easy glide switch for rapid switching between forward and reverse. Unique twin hammer mechanism containing only four working parts for longer tool life and reduced maintenance, delivers an instantaneous and balanced blow.

Specifications:
1/4" NPT air inlet.
Torque range 68-600Nm.
Free speed: 9,500rpm.
Overall length: 184mm.
Weight: 1.9kg.

Chicago Pneumatic 10mm Quick Change Pistol Grip Drill

CP1274
Industrial 10mm keyless chuck for quick drill bit changes for increased productivity. Fast and high power 0.38hp (280W) motor.

Free speed: 2,900rpm.
Air inlet: 1/4” BSP/NPT.
Air consumption: 19.9cfm.
Spindle thread: 3/8” - 24f.
Maximum torque: 1.8Nm (1.3ft/lbs).
Noise level: 78dBA.
Vibration level: <2.5m/s2.
Overall length: 175mm.
Weight: 0.90kg.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

777F Cloth Discs

High performance disc with ceramic Cubitron abrasive mineral for use on stainless steels.
Maximum rpm. 25mm discs = 25,000rpm.
38, 50 & 75mm discs = 20,000rpm.

Canning-Lippert "B" Quality Mop - Open Type (Medium Hardness)

All round mops for finishing steel and pressed brassware, nickel-silver, copper, brass, silver, aluminium chrome and plastics. Also suitable for nickel and chrome deposits. Made up of guaranteed quality all-cotton cloth in multiple sections of 1/2" (13mm) width. Open type mops will splay under pressure to suit irregular surfaces and give a medium polishing pressure. Can be used in conjunction with Lustre, Hyfin, Steelbrite, Scovax, and Satene compositions.



Product Number: 0220-041. Diameter: 4". Width: 1". Weight: 110g.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W170. Grade: RA80. Diameter: 8mm. Length: 13mm. Max. rpm: 40,000. Weight per 10: 40g.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Red Line - Medium

General purpose blades, with medium TPI. For cutting both long grain and cross grain solid wood, giving a good finish.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Norton Tool and Cutter Wheels

Contact your local branch if the size or style you require is not listed.

38A60-LVS Plain Recessed Grinding Wheel

Dimensions: 300 x 40 x 127mm.

Kobe? Saw Blades

HSS body saw blades with two tooth pitch variations. 24 tooth (medium) and 32 tooth (fine) to suit a wide range of applications. N.B. Tool not included.