Star Spray Gun Accessories

Standard Duty

Spare Nozzles

Norton Aluminium Oxide Sheets

In the same market-leading material as Norton's "Handy Roll", these high quality aluminium oxide sheets provide excellent flexibility. Ideal replacement for "Emery Cloth."

Sheets

Sheet size: (W)230mm x (L)280mm. Available in several grades.

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

50mm Dia x 25mm Height 12,300 MOS (rpm)

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

1/2" Ratchet Speed Wrench - CP828H

1/2" Square drive, 10mm bolt capacity. Efficient 1/2 hp motor provides up to 50ft/lbs torque, teasing throttle for speed control, compact, lightweight design, ideal for automotive work, front exhaust, 1/4" NPT air inlet thread for 10mm air hose, 150rpm free speed, 90PSI air pressure, 4CFM* air consumption. Overall length: 254mm



DP2610
Hammer finish casing, 10mm Jacobs chuck, stall resistant, directional front exhaust, needle bearing gears, 1/4 NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4CFM* air consumption, 3/8"- 24 spindle thread. Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Cup Brushes - Shaft Mounted

For all round use, ideal for work on larger surfaces removing burrs, rust and paint. 6mm Shanks. 30 SWG.

3M 260L Hookit™ Discs

Micron graded aluminum oxide resin bonded to a 3mm polyester film backing for dust free finishing. Open coat surface is coated with a dry lubricant to resist loading. With loop backing for attachment to hook faced backing pads.
Hole pattern: LD600A 6 hole.
Diameter: 150mm.
Grade: P1000.

Hole Pattern: LD601A. 7 Hole.

Diameter: 150mm.

3M Green Corps™ Cut-Off Wheels

These revolutionary cut-off wheels last up to eight times longer than conventional aluminium oxide cut-off wheels. The combination of a high speed rating and 3M Cubitron? mineral means you get a cool, sharp, quick cut with minimal product wear. Do not use on tools without guards.