York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Glass Fibre Backed (General-Purpose - Non-Scratch)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

Bosch Jigsaw Blades

Application: Glassfibre-reinforced plastics 5-50mm, plasterboard, fibre cement boards <80mm. Side set teeth. Effective length: 74mm. Pitch: 4.3.

Hard Metal Carbide Tipped For Special Applications (Pack 3)

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Cylindrical Ball Nosed

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Spare 18V Li-Ion Battery

Spare Li-Ion Battery

Charles Wet/Dry Cleaner - 1200W

'Turbo' bypass system. High efficiency power head. Over-fill cut-off valve. Triple 3-stage filtration system. Four wheel 'tracking' mobility with big wheel stability. Suction: 2450mm. Capacity Dry/Wet: 15/9 litre. Cleaning Range: 23.2m. Size: 355 x 355 x 455mm

CVC 370 - 110V

3M EXL Unitised Discs Roloc? XL-UR

All products feature a unique twist on/twist off fixing system. Grade, size or product can be changed quickly and easily. Discs have no centre nut allowing all of the disc surface to be used, reducing production costs. Suitable for use with all types of portable drills, grinders, etc. Can be used "on-face" as a disc or "on-edge" as a wheel.

Paslode Nail/Fuel Packs

To be used with Paslode Impulse IM65A F16 Angled Gas Brad Nailer.

Hitachi NiMh Batteries

Much higher potential capacity than NiCad. Require less conditioning than NiCad. Less toxic than NiCad.

EB1833X Battery 18V 3.3Ah Super Ni-MH

Charger compatibility: UC18YRL/J0 and UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.