Kennedy® Flexible Backing Pads

Suitable for use with all portable and air disc sanders. Recommended for use with Kennedy® abrasive discs.

3M 734 Wet or Dry? Silicon Carbide Paper

Aggressive fast cutting waterproof silicon carbide paper, for use on paints, lacquers and fillers.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Spares to suit Osaki™ CPW110 Pressure Washer

N.B. Pressure Washer not included.

Paslode Nail/Fuel Packs

To be used with Paslode Impulse IM65 F16 Gas Brad Nailer.

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Rolls

Roll size: (W)50mm x (L)50 Metres. Available in several grades.

Canning-Lippert "B" Quality Mop - Open Type (Medium Hardness)

All round mops for finishing steel and pressed brassware, nickel-silver, copper, brass, silver, aluminium chrome and plastics. Also suitable for nickel and chrome deposits. Made up of guaranteed quality all-cotton cloth in multiple sections of 1/2" (13mm) width. Open type mops will splay under pressure to suit irregular surfaces and give a medium polishing pressure. Can be used in conjunction with Lustre, Hyfin, Steelbrite, Scovax, and Satene compositions.



Product Number: 0220-130. Diameter: 6". Width: 1". Weight: 240g.

DMT Diamond Whetstones

Made with real diamond (monocrystaline). Easy to use - requires only light pressure to produce a keen edge. Uses water as a lubricant. Can be used to hone and sharpen steel, ceramics, glass, tungsten carbide, stone, etc.

Mini Whetstones

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Pointed Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Cubitron™ Fibre Sanding Discs

Cubitron™ II Fibre Discs are made with revolutionary 3M precision shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Get more productivity, throughput, disc life, comfort and grinding speed.

Makita 3" (82mm) Planers

KP0800
Makita KP0800 3"/82mm Planer complete with socket wrench and blade gauge assembly. Available in 110 or 240 volts. Fine adjustment. Rubberized soft grip. Faster cutting performance. Increased motor speed. Increased planing depth.

Input wattage: 620W.
No load speed: 17000rpm.
Cuts per minute: 34000.
Planing width: 82mm.
Planing depth: 2.5mm.
Maximum rebate depth: 9mm.
Weight 2.5kg.
Comes with socket wrench and blade gauge assembly.

Available in 110V or 240V.