Bosch Style Chisels

Suitable for air and electric hammers and breakers, for all classes of work.



For Bosch: GBH7/45, UBH6/35, UBH12/50, USH6, 11202, 11203, 11204, 11206, 11208, 11209. AEG (Atlas Copco): PHD26, PH38, PHD38, PH240D, PH350D. Black & Decker: HD2032, HD2038, P8032, P8038. 19mm Hex Shank with Single Flat and Round Tang.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Plain (no holes)

Diameter: 150mm.

DeWALT Hammer Drills

The DeWALT D25123K SDS plus hammer drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26 mm in diameter and with impact-stop in can be used for drilling in wood, steel, ceramic and screw driving applications.

Features include:
Rotation-stop for light chiselling applications in brick, soft masonry and occasionally concrete.
Large 22 mm hammer mechanism delivers high performance with low stress to the critical components resulting in better durability.
Electronic variable speed for total control in any application.
Safety clutch eliminates sudden high-torque reaction should the bit jam.
Ergonomic rubber coated back handle design for improved comfort in use.
Rounded ergonomic industrial design allows easy and comfortable handling in any application.
Improved sealing for maximum protection from dust ingress ensuring long tool life.

Supplied complete with:
Multi position side handle.
Depth stop.
Heavy duty carrying case.

Available as:
110v Order Code: DEW-272-2518K.
230v Order Code: DEW-272-2518R.

D25123K SDS Plus Hammer Drill

D25123K SDS Plus Hammer Drill Specification:
Power Input: 800W.
Power Output: 395W.
No Load Speed: 0-1150rpm.
Blows per Minute: 0-4300bpm.
Impact energy (EPTA 05/2009): 2.8J.
Tool Holder: SDS-Plus.
Drilling Capacity:
Wood: 30mm.
Metal: 13mm.
Concrete: 26mm.
Core bit: 65mm.
Weight: 2.9kg.
Length: 352mm.
Height: 200mm.

Hand/Arm Vibration: 17.8m/s2.
Uncertainty K 1 (Vibration): 1.5m/s².
Hand/Arm Vibration – Chisel: 9.8m/s².
Uncertainty K 2 (Vibration): 1.5m/s².
Hand/Arm Vibration – Metal: 2.6m/s².
Uncertainty K 3 (Vibration): 1.5m/s².
Sound Pressure: 89 dB(A).
Uncertainty K 1 (Sound): 3.8dB(A).
Accoustic Pressure: 100.1dB(A).
Uncertainty K 2 (Sound): 3.8dB(A).

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HSS - Heavy Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T318B)
Application: steel 3 - 6mm, aluminium 3 - 10mm.
Blade: HSS heavy duty, wavy set tooth form.
Tooth pitch: 2.0mm.

Effective length: 100mm.

Pack of 5.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 90 Inc. Angle

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Creusen 200mm (8") Bench Grinder

With a standard 5 year warranty, even for industrial usage, and designed for engineering/industrial applications that require robustness, reliability and efficiency the Creusen is a premium quality grinder. Fitted with maintenance-free motors with dynamically balanced rotors, they are virtually noise-free. Complete with two adjustable eye guards and tool rests, fitted with spark arrestors and anti-vibration mounts.

No load speed: 3000rpm (all models)

Spindle diameter: 15mm

Kennedy® Router Cutters

Rough Bottom. Used to produce flat bottom panel mould on cabinet and drawer fronts. Can also be used for edge mouldings.

Two Flute Classical Plunging Bits

Kennedy® Linisher Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



25mm (1") Wide x 1065mm (42") Long.

Chicago Pneumatic? 10mm Reversible Extra Heavy-Duty Air Drill

CP-789-26
Teasing throttle for precise control, handle exhaust, needle bearing gearings. Suitable for screwdriving, honing and heavy drilling.

Free speed: 2,600rpm.
Air inlet thread 1/4” NPT for 10mm hose.
Air consumption: 4cfm*.
Spindle thread: 3/8” - 24f.
Maximum torque: 4.2Nm (3.1ft/lbs).
Noise level: 101dBA.
Overall length: 178mm.
Weight: 1.13kg.

*Based on a 15 second
cycle per minute average use.