Hitachi Belt Sander

SB10V2
Efficient dust collection system. Variable speed. Electronic speed control. Powerful 1020W motor. Transparent cover makes sanding position clearly visible. Large trigger for easy operation. Soft grip handle. Dust bag mounted on left for easier sanding in corners. Single lever belt change. Tracking adjustment knob for belt alignment. Lock-on button. External brush caps.

Specifications:
Power input: 1020W.
No-load speed: 240-420/min.
Belt size: 100 x 610mm.
Length: 363mm.
Weight: 5.2kg.
Supplied with: sanding belt and dust bag.

Available in 240V and 110V.

3M 777F/707E File Belts

For grinding stainless, nickel alloy and titanium. 3M material bonded to a tough cloth backing. Incorporate a grinding aid to ensure long life and high cut rates on all metals. Can be used to blend scratches left by coated abrasive belts.



20mm Wide x 520mm Long.

Kennedy® Power Tool Chisels

Suitable for air and electric hammers and breakers, for all classes of work.

Kango Style Chisels

For Kango: 501, 627, 628, 637, 638, 430 - Type 750 Shanks. 19mm Hex Shank with Single Flat and Round Tang.

Kennedy® Velcro-Backed Sanding Discs

No spanners required to change discs. 100% of sanding disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied again and again. Unaffected by dust or moisture. Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

Hole Pattern: 800A. 8 Hole

Diameter: 115mm. (To suit PEX 115, PEX 9.6, Kress) dust extraction type.

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Inox BF Cut-Off Discs

Iron, chlorine and sulphur free. Thin 1.0 mm discs that enable you to achieve a uniquely clean cut in the shortest possible time whilst using minimum of force. vibration-free cutting, no thermal bluing and no burring. For use on thin sheet metal, steel cable, thin-walled profile sections, stainless steel pipes and non-ferrous metals. Max. operating speed: 13280 r.p.m.

York? Flexible Abrasives

Abrasive covered foam for general-purpose sanding on wood.

Sanding Blocks

Abrasive coated semi-flexible sponge, coated on all four surfaces. Suitable for sanding 90 contoured surfaces. Available in four different grades. Size: 96 x 69 x 25mm.

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T119B)
Application: wood 30mm, plastics 20mm.
Blade: HCS medium duty, wavy set tooth form.
Tooth pitch: 2.0mm.

Effective length: 48mm.

Pack of 5.

Hitachi Impact Drill

The Hitachi DV20VB2 13mm Impact Drill has a powerful 790W motor with a two speed aluminium gear casing for long life.

Features Include:
High quality Rohm keyless chuck.
Two speed gearbox.
Soft grip handle.
Reverse facility.

Available as:
110V Order Code: HIT-274-0172Q.
240V Order Code: HIT-274-0173R.

DV20VB2 13mm Impact Drill

DV20VB2 Impact Drill Specification:
Power input: 790W.
No-load speed: 0-1,000/3,000rpm.
Impact rate: 0-13,000/39,000bpm
Chuck capacity: 13mm
Drilling Capacity: Masonry: 20mm, Steel: 13mm, Wood: 40mm
Weight: 2.2kg

Supplied with:
Side handle.
Depth stop.
Carrying case.

DeWALT Torches

The DeWALT DW908 18V Torch has a wide angle beam with metal reflector and Xenon bulbs for greater brightness. The torch has a 90 degree pivoting head and 5 set positions for multi directional lighting (including horizontal and vertical lighting).

Other Features include:
Compact, lightweight design with impact resistant housing.
On board spare bulb storage.
Stable and free-standing.
Battery and charger sold separately.

DW908 18V Torch

DW908 Torch Specifications:
Bulb Type: Xenon.
Battery Type: 18V.
Weight (incl. battery): 0.34g.
Supplied with Spare bulb.
Battery and charger sold separately.

Norton Abrasives

Advanced grain and bond system for longer life and quicker cutting. Suitable for steel and stainless steel applications. Free from iron, sulphur and chloride. For use with portable angle grinders. Type 42 (depressed centre).

Type 42 Cut Off Discs