Random Orbital Sander - 150mm Elite Series

Features an alloy steel curved-throttle lever with built-in wrist support, 3M™ gripping material molded into the interchangeable comfort grip, conveniently located speed control dial, and internal muffler.
Precision balanced for smooth operation.
Takes dust management to the next level with powerful self-generated vacuum tools.
Features 3M™ proprietary clean sanding system with improved filter bag.
Newly designed wrist rest for more support.
Recessed level eliminates pinch points.
Composite cover to prevent crack housings.
Improved access to air fittings.
Improved dust collection port.
3M™ Hookit™ Clean Sanding Disc Pad, Filter Bag Adaptor and Clean Sanding Filter Bag included.

28517

Specifications:
Airflow Rate SCFM (LPM): 17 (481).
Dimensions (H x L): 92.6 x 245mm.
Max OPM: 10000.
Max RPM:12000.
Motor: 0.28hp.
Orbit dia.: 3/32" (2.5mm).
Tool dia.: 6" (152mm).
Weight: 0.874kg.

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Rolls

Roll size: (W)50mm x (L)50 Metres. Available in several grades.

338U Plain Stikit™ Sheets

Abrasive C paper backed sheets with a special self adhesive system that ensures the product remains firmly in place whilst in use but is easy to apply and quick to remove. Ideal for intermediate and final sanding on lacquered hard and soft woods, paints lacquers, primers, solid surface materials and plastics.



Plain (no holes)

Norton? Aluminium Oxide Rolls

In a useful dispensing pack with a perforated edge to facilitate cutting to required size, these high quality aluminium oxide rolls are ideal for a range of hand-sanding jobs where greater flexibility is required.

Rolls

Roll size: (W)25mm x (L)25 Metres. Available in several grades.

Hitachi Nibblers

CN16SA
Lightweight design with slimline grip. Fast cutting speed of 1.8m/min (mild steel plate). Downward cutting action permits cutting of trapezoidal metal plate and minimises scattering of chips on workpiece. Three position indexing die holder allows quick and easy change of cutting direction.

Specifications:
Cutting capacity: mild steel 1.6mm, S/steel: 1.2mm, aluminium plate: 2.3mm.
Power input: 400W.
No load speed 2300/min.
Min cutting radius: 40mm.
Length: 250mm.
Weight: 1.7kg.
Standard Accessories: die, punch and 2 wrenches.

Available in 240V and 110V.

Makita 125mm (5") Angle Grinder

Increased power at 710W. Labyrinth construction protects all ball bearings from dust and debris. Small circumference barrel grip for easy handling. Shaft lock for easy wheel changes. Easier repairing of gear section, assembled with key. High heat resistance. No Load Speed: 10,000rpm. Wheel size: 125mm. Bore Size: 22mm. Spindle size: M14x2mm. Input wattage: 710W. Net Weight: 1.4kg. Accessories: Lock nut, wrench, flange and wheel guard, side handle.

9555NB

Kennedy® Portable Task Light

Portable Task Light using an energy saving 28W 2D fluorescent bulb that generates the same light as halogen but using far less energy. Eliminates common problems associated with halogen bulbs such as high heat and bulb blow out when knocked. Tough polycarbonate case and virtually shatterproof lens. Ideal for all trades. IP44 Rated. 3M cable.

Portable Task Light

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Round Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 27 General Purpose Metal A30R Grinding

For steel/stainless steel. Fast material removal. General-purpose applications. Free of iron, sulphur and chlorine. Made of corundum. Box quantity 10.

York? Carbide Burrs

Manufactured in purpose-built facilities, employing state of the art equipment. Comprehensive quality control procedures have an enviable reputation for quality, safety, consistency and value. Tested in accordance with the world?s highest safety standards. They do not contain materials that are known to be hazardous. The combination of advanced manufacturing processes with the finest raw materials produces a range that is cost effective option. Products are supplied in accordance with ISO 9001.

8 Piece 'Speedway' Carbide Burr Set - 3mm Shank

?Speedway? carbide burrs have a unique dual cut tooth design that alternates between fine and coarse pitch flutes to maximise the amount of material that can be removed from the work piece rapidly, whilst at the same time maintaining a smooth surface finish.

Contains:
1 of each:
10 x 19mm cylindrical end cutting, cylindrical plain end, cylindrical ball end, round tree, pointed tree,
6 x 5mm spherical,
6 x 19mm conical,
10 x 27 conical 14.

Supplied in fitted plastic case.